Enter a name for this profile.

Optional description of the profile.

Enter a value between 0 and 2,048.

This value represents the image size that will be skipped by the image scan unit, in kilobytes. Images that are too small are difficult to scan and are more likely to be rated incorrectly by the image scan engine.

The default value is 1.

This value represents the image width that will be skipped by the image scan unit, in pixels. Images that are too small are difficult to scan and are more likely to be rated incorrectly by the image scan engine.

The default value is 30 pixels; the minimum value is 5 pixels.

This value represents the image height that will be skipped by the image scan unit, in pixels. Images that are too small are difficult to scan and are more likely to be rated incorrectly by the image scan engine.

The default value is 30 pixels; the minimum value is 5 pixels.

Set to either Pass or Block the image when it exceeds the rating threshold.

The default is Pass.

Select a replacement image in the following formats:

• JPEG

• GIF

• TIFF

• PNG

Other image types are not supported.

To specify the replacement image, go to System > Replacement Messages and select Manage Images.

Select All to log all content or Violation to log content that exceeds any of the strictness levels.

Enable to save blocked images.

Enable or disable optical character recognition which detects and extracts text in images with a score greater than the configured OCR threshold and takes action accordingly as defined in the DLP profile.

This option takes effect only if the policy meets the following requirements: Content Analysis is enabled with this image analysis profile selected. DLP Profile is enabled with a profile configured and selected.

When Optical Character Recognition is enabled, configure the threshold to activate optical character recognition. The value range is 0 - 100, where 0 means bypassing all images without DLP and 100 means processing all images with DLP that triggers OCR. The default is 30.

For each category, select to Allow, Deny, or Monitor content that exceeds the strictness level, and set the level between 0 and 100.

The higher the image score, the more chance of the image being explicit. The challenge with this setting is that if you set it too high, it will block legitimate images. If you set it too low, it will allow explicit images through. If the image score is above this setting, the Rating Error Action is taken.

The default value is 30.

The alcohol category is designed to identify images containing alcoholic brands and beverages, people drinking alcohol, frat parties, keg stands, bars and nightclubs, party aftermaths, shots, beer pong, kegs, and plastic cups associated with drinking.

The drugs category is designed to identify images containing illegal and legal drugs, drug use, drug paraphernalia, and plants and symbols relating to drugs.

The extremism category is designed to identify images containing terrorist militants, beheadings, executions, propaganda, acts of terrorism, KKK rallies, Hitler, insignia related to Nazism, KKK, ISIS, and white supremacy icons.

The gambling category is designed to identify images containing gambling.

The gore or graphic violence category is designed to identify images containing gore, graphic violence, self-harm, suicide, horrific imagery, bloody wounds, accident victims, shooting victims, beatings, mutilation, decapitation, and images that contain blood and guts.

The pornography category is designed to identify images and videos containing commercial pornography, amateur pornography, sexting selfies, nudity, sex acts, grayscale pornographic images, sexually explicit cartoons, and manga.

The swim and underwear, or risqué, category is designed to identify images containing people wearing swimwear or beachwear, underwear, and lingerie.