Matching IPsec tunnel gateway based on address parameters

FortiOS supports source IP anchoring in dial-up IPsec tunnel connection. See Remote gateway matching.

The following example uses the source IP address of the client to match the IPsec tunnel gateway based on the country parameters. The client, PC1, is behind a NAT'd device with address 160.106.x.x, which resolves to Canada. Two IPsec tunnels, TestMatchA and TestMatchB, will be configured on the phase1 interface to test remote gateway country matching. The tunnel that is assigned to Canada will match while the other will not.

This example only includes configurations related to the remote-gw-match feature. Other configurations, such as those for the phase2 interface, are omitted for brevity.

To match dialup IPsec tunnel gateway based on country:

1. On the phase1 interface, configure two IPsec tunnels on the FGT VPN Gateway, with TestMatchA set to the United States (US) and TestMatchB set to Canada (CA):

   config vpn ipsec phase1-interface
       edit "TestMatchA"
           set type dynamic
           set ike-version 2
           set remote-gw-match geography
           set remote-gw-country "US"
       next
       edit "TestMatchB"
           set type dynamic
           set ike-version 2
           set remote-gw-match geography
           set remote-gw-country "CA"
       next
   end

2. From PC2, initiate a dial-up VPN connection.

3. On the FortiGate, review the gateway list.

   # diagnose vpn ike gateway list
   
   vd: root/0
   name: TestMatchB_0
   version: 2
   interface: port5 13
   addr: 173.1.1.1:500 -> 160.106.x.x:500
   tun_id: 160.106.x.x/::10.0.0.35
   remote_location: 0.0.0.0
   network-id: 0
   created: 162s ago
   peer-id: C = US, ST = California, L = Sunnyvale, O = Fortinet, OU = FortiGate, CN = FG201EXXXXXXXXXX, emailAddress = support@fortinet.com
   peer-id-auth: yes
   PPK: no
   IKE SA: created 1/1  established 1/1  time 10/10/10 ms
   IPsec SA: created 1/1  established 1/1  time 0/0/0 ms
   
     id/spi: 10884 54ab158a7d192cbc/ef82ff5e91d72f59
     direction: responder
     status: established 162-162s ago = 10ms
     proposal: aes128-sha256
     child: no
     SK_ei: f1d74e0f026674b1-7687368f42305b31
     SK_er: b693bc06ea670ad3-643a6562cca05617
     SK_ai: 7edea8cfc3f82ce0-9a8ac426e05205b5-b71efc76d940589c-e9725108e7309cf5
     SK_ar: da3eaa37cc171369-1261fc51d4404bc7-c38bbaa9efa1bcfe-de3c285f3eb18617
     PPK: no
     message-id sent/recv: 0/8
     lifetime/rekey: 86400/85967
     DPD sent/recv: 00000000/00000000
     peer-id: C = US, ST = California, L = Sunnyvale, O = Fortinet, OU = FortiGate, CN = FG201EXXXXXXXXXX, emailAddress = support@fortinet.com

   Since the client IP address is anchored in Canada, TestMatchB matched.

4. Change the country assignments of the two IPsec tunnels so that TestMatchA is set to Canada (CA) and TestMatchB is set to China (CN):

   config vpn ipsec phase1-interface
       edit "TestMatchA"
           set type dynamic
           set ike-version 2
           set remote-gw-match geography
           set remote-gw-country "CA"
       next
       edit "TestMatchB"
           set type dynamic
           set ike-version 2
           set remote-gw-match geography
           set remote-gw-country "CN"
       next
   end

5. From PC2, initiate a dial-up VPN connection.

6. On the FortiGate, review the gateway list again.

   # diagnose vpn ike gateway list
   
   vd: root/0
   name: TestMatchA_0
   version: 2
   interface: port5 13
   addr: 173.1.1.1:500 -> 160.106.x.x:500
   tun_id: 160.106.x.x/::10.0.0.37
   remote_location: 0.0.0.0
   network-id: 0
   created: 1856s ago
   peer-id: C = US, ST = California, L = Sunnyvale, O = Fortinet, OU = FortiGate, CN = FG201EXXXXXXXXXX, emailAddress = support@fortinet.com
   peer-id-auth: yes
   PPK: no
   IKE SA: created 1/1  established 1/1  time 0/0/0 ms
   IPsec SA: created 1/1  established 1/1  time 0/0/0 ms
   
     id/spi: 10886 fec7cd972847a2ac/0c1ee0b54ddc155e
     direction: responder
     status: established 1856-1856s ago = 0ms
     proposal: aes128-sha256
     child: no
     SK_ei: 7e8c8d05a6a9adab-bfcf9ff2705e8965
     SK_er: bdd6ee61fc38cd81-202b5f142cefa5ce
     SK_ai: 30f905722136bbce-0c96d365dd52957c-3d05b83efd026140-831fbc76fc677456
     SK_ar: 4363f29c44d49f30-7d798777766efb09-aca39e8a8ca0e6d7-5b83c113e46b339d
     PPK: no
     message-id sent/recv: 0/89
     lifetime/rekey: 86400/84273
     DPD sent/recv: 00000000/00000000
     peer-id: C = US, ST = California, L = Sunnyvale, O = Fortinet, OU = FortiGate, CN = FG201EXXXXXXXXXX, emailAddress = support@fortinet.com

   Since the client IP address is anchored in Canada, TestMatchA matched.