Proxy policy security profiles

Web proxy policies support most security profile types.

Security profiles must be created before they can be used in a policy, see Security Profiles for information.

Explicit web proxy policy

The security profiles supported by explicit web proxy policies are:

• AntiVirus
• Web Filter
• Video Filter
• Application Control
• IPS
• DLP Profile
• ICAP
• Web Application Firewall
• File Filter
• SSL Inspection

To configure security profiles on an explicit web proxy policy in the GUI:

1. Go to Policy & Objects > Proxy Policy.

2. Click Create New.

3. Set the following:

   Proxy Type	Explicit Web
   Outgoing Interface	port1
   Source	all
   Destination	all
   Schedule	always
   Service	webproxy
   Action	ACCEPT

4. In the Firewall / Network Options section, set Protocol Options to default.

5. In the Security Profiles section, make the following selections (for this example, these profiles have all already been created):

   AntiVirus	av
   Web Filter	urlfiler
   Application Control	app
   IPS	Sensor-1
   DLP Profile	dlp
   ICAP	default
   Web Application Firewall	default
   SSL Inspection	deep-inspection

6. Click OK to create the policy.

To configure security profiles on an explicit web proxy policy in the CLI:

config firewall proxy-policy
    edit 1
        set proxy explicit-web
        set dstintf "port1"
        set srcaddr "all"
        set dstaddr "all"
        set service "web"
        set action accept
        set schedule "always"
        set utm-status enable
        set av-profile "av"
        set webfilter-profile "urlfilter"
        set dlp-profile "dlp"
        set ips-sensor "sensor-1"
        set application-list "app"
        set icap-profile "default"
        set waf-profile "default"
        set ssl-ssh-profile "deep-inspection"
    next
end

Transparent proxy

The security profiles supported by transparent proxy policies are:

• AntiVirus
• Web Filter
• Video Filter
• Application Control
• IPS
• DLP Profile
• ICAP
• Web Application Firewall
• File Filter
• SSL Inspection

To configure security profiles on a transparent proxy policy in the GUI:

1. Go to Policy & Objects > Proxy Policy.

2. Click Create New.

3. Set the following:

   Proxy Type	Transparent Web
   Incoming Interfae	port2
   Outgoing Interface	port1
   Source	all
   Destination	all
   Schedule	always
   Service	webproxy
   Action	ACCEPT

4. In the Firewall / Network Options section, set Protocol Options to default.

5. In the Security Profiles section, make the following selections (for this example, these profiles have all already been created):

   AntiVirus	av
   Web Filter	urlfiler
   Application Control	app
   IPS	Sensor-1
   DLP Profile	dlp
   ICAP	default
   Web Application Firewall	default
   SSL Inspection	deep-inspection

6. Click OK to create the policy.

To configure security profiles on a transparent proxy policy in the CLI:

config firewall proxy-policy
    edit 2
        set proxy transparent-web
        set srcintf "port2"
        set dstintf "port1"
        set srcaddr "all"
        set dstaddr "all"
        set service "webproxy"
        set action accept
        set schedule "always"
        set utm-status enable
        set av-profile "av"
        set webfilter-profile "urlfilter"
        set dlp-profile "dlp"
        set ips-sensor "sensor-1"
        set application-list "app"
        set icap-profile "default"
        set waf-profile "default"
        set ssl-ssh-profile "certificate-inspection"
    next
end

FTP proxy

The security profiles supported by FTP proxy policies are:

• AntiVirus
• Application Control
• IPS
• File Filter
• DLP Profile

To configure security profiles on an FTP proxy policy in the GUI:

1. Go to Policy & Objects > Proxy Policy.

2. Click Create New.

3. Set the following:

   Proxy Type	FTP
   Outgoing Interface	port1
   Source	all
   Destination	all
   Schedule	always
   Action	ACCEPT

4. In the Firewall / Network Options section, set Protocol Options to default.

5. In the Security Profiles section, make the following selections (for this example, these profiles have all already been created):

   AntiVirus	av
   Application Control	app
   IPS	Sensor-1
   DLP Profile	dlp

6. Click OK to create the policy.

To configure security profiles on an FTP proxy policy in the CLI:

config firewall proxy-policy
    edit 3
        set proxy ftp
        set dstintf "port1"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set utm-status enable
        set av-profile "av"
        set dlp-profile "dlp"
        set ips-sensor "sensor-1"
        set application-list "app"
    next
end