Fortinet black logo

Administration Guide

Viewing event logs

Viewing event logs

Event log subtypes are available on the Log & Report > System Events page. Not all of the event log subtypes are available by default. See System Events log page for more information.

When viewing event logs in the Logs tab, use the event log subtype dropdown list on the to navigate between event log types.

System Events

Always available.

Router Events

Always available.

VPN Events

Available when VPN is enabled in System > Feature Visibility.

SD-WAN Events

Always available.

User Events

Always available.

Endpoint Events

Available when Endpoint Control is enabled in System > Feature Visibility.

HA Events

Always available.

Security Rating Events

Always available, but logs are only generated when a Security Rating License is registered.

WAN Opt. & Cache Events

Available on devices with two hard disks by default. On devices with one hard disk, the disk usage must be set to wanopt and then WAN Opt. & Cache must be enabled in System > Feature Visibility.

WiFi Events

Available on hardware devices when WiFi Controller is enabled in System > Feature Visibility.

FortiExtender Events

Available when FortiExtender is enabled in System > Feature Visibility.

SDN Connector Events

Always available.

FortiSwitch Events

Available when Switch Controller is enabled in System > Feature Visibility.

CIFS Events

Always available.

REST API Events

Always available.

Logs can be filtered by date and time in the Log & Report > System Events page. The log viewer can be filtered with a custom range or with specific time frames.

Note

UTM logs can also be filtered by date and time in Log & Report > Security Events. See Security Events log page.

The time frame available is dependent on the source:

  • Logs sourced from FortiAnalyzer, FortiGate Cloud, and FortiAnalyzer Cloud have the same time frame options as FortiView (5 minutes, 1 hour, 24 hours, or 7 days).

  • Logs sourced from the Disk have the time frame options of 5 minutes, 1 hour, 24 hours, 7 days, or None.

  • Logs source from Memory do not have time frame filters.

A custom time frame can be applied using the Date/Time filter. If the Date/Time filter is applied, the time frame will be disabled and set to custom.

Note

Time frame settings for each Log & Report page are independent of each other. For example, if you change the time frame on the System Events page, the time frame will be different than that of the Security Events page unless it is also changed to match.

Viewing event logs

Event log subtypes are available on the Log & Report > System Events page. Not all of the event log subtypes are available by default. See System Events log page for more information.

When viewing event logs in the Logs tab, use the event log subtype dropdown list on the to navigate between event log types.

System Events

Always available.

Router Events

Always available.

VPN Events

Available when VPN is enabled in System > Feature Visibility.

SD-WAN Events

Always available.

User Events

Always available.

Endpoint Events

Available when Endpoint Control is enabled in System > Feature Visibility.

HA Events

Always available.

Security Rating Events

Always available, but logs are only generated when a Security Rating License is registered.

WAN Opt. & Cache Events

Available on devices with two hard disks by default. On devices with one hard disk, the disk usage must be set to wanopt and then WAN Opt. & Cache must be enabled in System > Feature Visibility.

WiFi Events

Available on hardware devices when WiFi Controller is enabled in System > Feature Visibility.

FortiExtender Events

Available when FortiExtender is enabled in System > Feature Visibility.

SDN Connector Events

Always available.

FortiSwitch Events

Available when Switch Controller is enabled in System > Feature Visibility.

CIFS Events

Always available.

REST API Events

Always available.

Logs can be filtered by date and time in the Log & Report > System Events page. The log viewer can be filtered with a custom range or with specific time frames.

Note

UTM logs can also be filtered by date and time in Log & Report > Security Events. See Security Events log page.

The time frame available is dependent on the source:

  • Logs sourced from FortiAnalyzer, FortiGate Cloud, and FortiAnalyzer Cloud have the same time frame options as FortiView (5 minutes, 1 hour, 24 hours, or 7 days).

  • Logs sourced from the Disk have the time frame options of 5 minutes, 1 hour, 24 hours, 7 days, or None.

  • Logs source from Memory do not have time frame filters.

A custom time frame can be applied using the Date/Time filter. If the Date/Time filter is applied, the time frame will be disabled and set to custom.

Note

Time frame settings for each Log & Report page are independent of each other. For example, if you change the time frame on the System Events page, the time frame will be different than that of the Security Events page unless it is also changed to match.