Configuring the FSSO timeout when the collector agent connection fails

The logon-timeout option is used to manage how long authenticated FSSO users on the FortiGate will remain on the list of authenticated FSSO users when a network connection to the collector agent is lost.

config user fsso
    edit <name>
        set server <string>
        set password <string>
        set logon-timeout <integer>
    next
end

logon-timeout <integer>

Enter the interval to keep logons after the FSSO server is down, in minutes (1 - 2880, default = 5).

Example

In this example, the logon timeout is set for four minutes.

To configure the FSSO logon timeout:

1. Set the timeout value:

   config user fsso
       edit "ad"
           set server "10.1.100.141"
           set password ********
           set logon-timeout 4
       next
   end

2. Log on to a PC with a valid FSSO user account.
3. Enable real-time debugging and check for authd polling collector agent information. During this time, the connection to the collector agent is lost:

   # diagnose debug enable 
   # diagnose debug application authd -1
   # diagnose debug application fssod -1 				
   021-06-10 16:20:41 authd_timer_run: 2 expired
   2021-06-10 16:20:41 authd_epoll_work: timeout 39970
   2021-06-10 16:20:46 fsae_io_ctx_process_msg[ad]: received heartbeat 100031
   2021-06-10 16:20:46 authd_epoll_work: timeout 1690
   2021-06-10 16:20:47 authd_timer_run: 1 expired
   2021-06-10 16:20:47 authd_epoll_work: timeout 39990
   2021-06-10 16:20:56 fsae_io_ctx_process_msg[ad]: received heartbeat 100032
   2021-06-10 16:20:56 authd_epoll_work: timeout 31550
   2021-06-10 16:21:00 _event_error[ad]: error occurred in epoll_in: Success
   2021-06-10 16:21:00 disconnect_server_only[ad]: disconnecting
   2021-06-10 16:21:00 authd_timer_run: 1 expired
   2021-06-10 16:21:00 authd_epoll_work: timeout 9620

4. After about three minutes, check that the FSSO user is still in the list of authenticated users and can connect to the internet:

   # diagnose firewall auth l
   10.1.100.188, TEST1
           type: fsso, id: 0, duration: 229, idled: 229
           server: ad
           packets: in 0 out 0, bytes: in 0 out 0
           user_id: 16777219
           group_id: 3 33554433
           group_name: ad CN=GROUP1,OU=TESTING,DC=FORTINET-FSSO,DC=COM
   
   ----- 1 listed, 0 filtered ------

5. After four minutes, check the debugs again. Note that the FSSO users are cleared:

   ...
   2021-06-10 16:24:57 authd_timer_run: 3 expired
   2021-06-10 16:24:57 authd_epoll_work: timeout 60000
   2021-06-10 16:24:59 [fsae_db_logoff:248]: vfid 0, ip 10.1.100.188, id(0), port_range_sz(0)  
   2021-06-10 16:24:59 [authd_fp_notify_logoff:444]: vfid 0, ip 10.1.100.188, id 0
   2021-06-10 16:24:59 [authd_fp_on_user_logoff:412]: vfid 0, ip 10.1.100.188
   2021-06-10 16:24:59 [authd_fp_on_user_logoff:412]: vfid 0, ip 10.1.100.188
   2021-06-10 16:24:59 [authd_fp_on_user_logoff:412]: vfid 0, ip 10.1.100.188
   2021-06-10 16:24:59 [authd_fpc_on_msg:545]: code 0, type 132, len 28 seq 0
   2021-06-10 16:24:59 [authd_fp_on_user_logoff:412]: vfid 0, ip 10.1.100.188
   2021-06-10 16:24:59 authd_epoll_work: timeout 21990
   

   # diagnose firewall auth l
   
   ----- 0 listed, 0 filtered ------

   After the connection to the collector agent is restored, all users remain in the list of authenticated users and are synchronized to the FortiGate. The users do not need to log in again for authentication.