Enabling FortiSwitch features

Enable the following FortiSwitch features:

• Network assisted device detection, which allows the FortiGate unit to use the information about connected devices detected by the managed FortiSwitch unit.
• IoT scanning, which leverages the FortiGuard service to identify Internet of things (IoT) devices. This feature requires an IoT Detection Service license.

To enable FortiSwitch features:

1. Enable network-assisted device detection:

   config switch-controller network-monitor-settings
       set network-monitoring enable
   end

2. Enable IoT scanning:
   1. Go to WiFi & Switch Controller > FortiLink Interface.
   2. Enable IoT scanning.
   3. Click Apply.