Allowing guest wireless traffic to internet

This policy allows guest access to the internet. This access is limited to the second lower quality WAN link named LAN2.

To allow guest wireless traffic to the internet:

1. Go to Policy & Objects > Firewall Policy, and click Create New .
2. Set the following options:
   1. Enter a name.
   2. Set Incoming Interface to ACME Guest.
   3. Set Source to Guest_WLAN*.

      *The Guest_WLAN address object is created automatically based on the Guest SSID name.

   4. Set Outgoing Interface to WAN2.
   5. Set Destination to All.
   6. Set Service to All.
   7. Set Action to Accept.
   8. Enable NAT.
3. Click OK to save the policy.