config firewall central-snat-map
Configure IPv4 and IPv6 central SNAT policies.
config firewall central-snat-map
Description: Configure IPv4 and IPv6 central SNAT policies.
edit <policyid>
set uuid {uuid}
set status [enable|disable]
set type [ipv4|ipv6]
set srcintf <name1>, <name2>, ...
set dstintf <name1>, <name2>, ...
set orig-addr <name1>, <name2>, ...
set orig-addr6 <name1>, <name2>, ...
set dst-addr <name1>, <name2>, ...
set dst-addr6 <name1>, <name2>, ...
set protocol {integer}
set orig-port {user}
set nat [disable|enable]
set nat-ippool <name1>, <name2>, ...
set nat-ippool6 <name1>, <name2>, ...
set nat-port {user}
set comments {var-string}
next
end
config firewall central-snat-map
Parameter name |
Description |
Type |
Size |
||||||
---|---|---|---|---|---|---|---|---|---|
uuid |
Universally Unique Identifier (UUID; automatically assigned but can be manually reset). |
uuid |
Not Specified |
||||||
status |
Enable/disable the active status of this policy. |
option |
- |
||||||
|
|
||||||||
type |
IPv4/IPv6 source NAT. |
option |
- |
||||||
|
|
||||||||
srcintf `<name>` |
Source interface name from available interfaces.<br>Interface name. |
string |
Maximum length: 79 |
||||||
dstintf `<name>` |
Destination interface name from available interfaces.<br>Interface name. |
string |
Maximum length: 79 |
||||||
orig-addr `<name>` |
IPv4 Original address.<br>Address name. |
string |
Maximum length: 79 |
||||||
orig-addr6 `<name>` |
IPv6 Original address.<br>Address name. |
string |
Maximum length: 79 |
||||||
dst-addr `<name>` |
IPv4 Destination address.<br>Address name. |
string |
Maximum length: 79 |
||||||
dst-addr6 `<name>` |
IPv6 Destination address.<br>Address name. |
string |
Maximum length: 79 |
||||||
protocol |
Integer value for the protocol type (0 - 255). |
integer |
Minimum value: 0 Maximum value: 255 |
||||||
orig-port |
Original TCP port (1 to 65535, 0 means any port). |
user |
Not Specified |
||||||
nat |
Enable/disable source NAT. |
option |
- |
||||||
|
|
||||||||
nat-ippool `<name>` |
Name of the IP pools to be used to translate addresses from available IP Pools.<br>IP pool name. |
string |
Maximum length: 79 |
||||||
nat-ippool6 `<name>` |
IPv6 pools to be used for source NAT.<br>IPv6 pool name. |
string |
Maximum length: 79 |
||||||
nat-port |
Translated port or port range (1 to 65535, 0 means any port). |
user |
Not Specified |
||||||
comments |
Comment. |
var-string |
Maximum length: 1023 |