config firewall shaper per-ip-shaper

Configure per-IP traffic shaper.

config firewall shaper per-ip-shaper

Description: Configure per-IP traffic shaper.

edit <name>

set max-bandwidth {integer}

set bandwidth-unit [kbps|mbps|...]

set max-concurrent-session {integer}

set diffserv-forward [enable|disable]

set diffserv-reverse [enable|disable]

set diffservcode-forward {user}

set diffservcode-rev {user}

next

end

config firewall shaper per-ip-shaper

Parameter name	Description	Type	Size
max-bandwidth	Upper bandwidth limit enforced by this shaper (0 - 16776000). 0 means no limit. Units depend on the bandwidth-unit setting.	integer	Minimum value: 0 Maximum value: 16776000
bandwidth-unit	Unit of measurement for maximum bandwidth for this shaper (Kbps, Mbps or Gbps).	option	-
	Option Description kbps Kilobits per second. mbps Megabits per second. gbps Gigabits per second.
max-concurrent-session	Maximum number of concurrent sessions allowed by this shaper (0 - 2097000). 0 means no limit.	integer	Minimum value: 0 Maximum value: 2097000
diffserv-forward	Enable/disable changing the Forward (original) DiffServ setting applied to traffic accepted by this shaper.	option	-
	Option Description enable Enable setting forward (original) traffic DiffServ. disable Disable setting forward (original) traffic DiffServ.
diffserv-reverse	Enable/disable changing the Reverse (reply) DiffServ setting applied to traffic accepted by this shaper.	option	-
	Option Description enable Enable setting reverse (reply) traffic DiffServ. disable Disable setting reverse (reply) traffic DiffServ.
diffservcode-forward	Forward (original) DiffServ setting to be applied to traffic accepted by this shaper.	user	Not Specified
diffservcode-rev	Reverse (reply) DiffServ setting to be applied to traffic accepted by this shaper.	user	Not Specified