config wireless-controller hotspot20 h2qp-wan-metric

Configure WAN metrics.

config wireless-controller hotspot20 h2qp-wan-metric

Description: Configure WAN metrics.

edit <name>

set link-status [up|down|...]

set symmetric-wan-link [symmetric|asymmetric]

set link-at-capacity [enable|disable]

set uplink-speed {integer}

set downlink-speed {integer}

set uplink-load {integer}

set downlink-load {integer}

set load-measurement-duration {integer}

next

end

config wireless-controller hotspot20 h2qp-wan-metric

Parameter name	Description	Type	Size
link-status	Link status.	option	-
	Option Description up Link up. down Link down. in-test Link in test state.
symmetric-wan-link	WAN link symmetry.	option	-
	Option Description symmetric Symmetric WAN link (uplink and downlink speeds are the same). asymmetric Asymmetric WAN link (uplink and downlink speeds are not the same).
link-at-capacity	Link at capacity.	option	-
	Option Description enable Link at capacity (not allow additional mobile devices to associate). disable Link not at capacity (allow additional mobile devices to associate).
uplink-speed	Uplink speed (in kilobits/s).	integer	Minimum value: 0 Maximum value: 4294967295
downlink-speed	Downlink speed (in kilobits/s).	integer	Minimum value: 0 Maximum value: 4294967295
uplink-load	Uplink load.	integer	Minimum value: 0 Maximum value: 255
downlink-load	Downlink load.	integer	Minimum value: 0 Maximum value: 255
load-measurement-duration	Load measurement duration (in tenths of a second).	integer	Minimum value: 0 Maximum value: 65535