config firewall policy6
Description: Configure IPv6 policies.
edit <policyid>
set name {string}
set uuid {uuid}
set srcintf <name1>, <name2>, ...
set dstintf <name1>, <name2>, ...
set srcaddr <name1>, <name2>, ...
set dstaddr <name1>, <name2>, ...
set action [accept|deny|...]
set firewall-session-dirty [check-all|check-new]
set status [enable|disable]
set vlan-cos-fwd {integer}
set vlan-cos-rev {integer}
set schedule {string}
set service <name1>, <name2>, ...
set tos {user}
set tos-mask {user}
set tos-negate [enable|disable]
set tcp-session-without-syn [all|data-only|...]
set anti-replay [enable|disable]
set utm-status [enable|disable]
set inspection-mode [proxy|flow]
set webcache [enable|disable]
set webcache-https [disable|enable]
set http-policy-redirect [enable|disable]
set ssh-policy-redirect [enable|disable]
set webproxy-profile {string}
set profile-type [single|group]
set profile-group {string}
set profile-protocol-options {string}
set ssl-ssh-profile {string}
set av-profile {string}
set webfilter-profile {string}
set dnsfilter-profile {string}
set emailfilter-profile {string}
set dlp-sensor {string}
set ips-sensor {string}
set application-list {string}
set voip-profile {string}
set icap-profile {string}
set cifs-profile {string}
set waf-profile {string}
set ssh-filter-profile {string}
set logtraffic [all|utm|...]
set logtraffic-start [enable|disable]
set auto-asic-offload [enable|disable]
set np-acceleration [enable|disable]
set webproxy-forward-server {string}
set traffic-shaper {string}
set traffic-shaper-reverse {string}
set per-ip-shaper {string}
set application <id1>, <id2>, ...
set app-category <id1>, <id2>, ...
set url-category <id1>, <id2>, ...
set app-group <name1>, <name2>, ...
set nat [enable|disable]
set fixedport [enable|disable]
set ippool [enable|disable]
set poolname <name1>, <name2>, ...
set session-ttl {integer}
set inbound [enable|disable]
set outbound [enable|disable]
set natinbound [enable|disable]
set natoutbound [enable|disable]
set send-deny-packet [enable|disable]
set vpntunnel {string}
set diffserv-forward [enable|disable]
set diffserv-reverse [enable|disable]
set diffservcode-forward {user}
set diffservcode-rev {user}
set tcp-mss-sender {integer}
set tcp-mss-receiver {integer}
set comments {var-string}
set rsso [enable|disable]
set custom-log-fields <field-id1>, <field-id2>, ...
set replacemsg-override-group {string}
set srcaddr-negate [enable|disable]
set dstaddr-negate [enable|disable]
set service-negate [enable|disable]
set groups <name1>, <name2>, ...
set users <name1>, <name2>, ...
set timeout-send-rst [enable|disable]
set ssl-mirror [enable|disable]
set ssl-mirror-intf <name1>, <name2>, ...
set dsri [enable|disable]
set vlan-filter {user}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| name | Policy name. | string | Maximum length: 35 |
| uuid | Universally Unique Identifier (UUID; automatically assigned but can be manually reset). | uuid | Not Specified |
srcintf <name> |
Incoming (ingress) interface. Interface name. |
string | Maximum length: 79 |
dstintf <name> |
Outgoing (egress) interface. Interface name. |
string | Maximum length: 79 |
srcaddr <name> |
Source address and address group names. Address name. |
string | Maximum length: 79 |
dstaddr <name> |
Destination address and address group names. Address name. |
string | Maximum length: 79 |
| action | Policy action (allow/deny/ipsec). accept: Allows session that match the firewall policy. deny: Blocks sessions that match the firewall policy. ipsec: Firewall policy becomes a policy-based IPsec VPN policy. |
option | - |
| firewall-session-dirty | How to handle sessions if the configuration of this firewall policy changes. check-all: Flush all current sessions accepted by this policy. These sessions must be started and re-matched with policies. check-new: Continue to allow sessions already accepted by this policy. |
option | - |
| status | Enable or disable this policy. enable: Enable setting. disable: Disable setting. |
option | - |
| vlan-cos-fwd | VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest | integer | Minimum value: 0 Maximum value: 7 |
| vlan-cos-rev | VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest | integer | Minimum value: 0 Maximum value: 7 |
| schedule | Schedule name. | string | Maximum length: 35 |
service <name> |
Service and service group names. Address name. |
string | Maximum length: 79 |
| tos | ToS (Type of Service) value used for comparison. | user | Not Specified |
| tos-mask | Non-zero bit positions are used for comparison while zero bit positions are ignored. | user | Not Specified |
| tos-negate | Enable negated TOS match. enable: Enable TOS match negate. disable: Disable TOS match negate. |
option | - |
| tcp-session-without-syn | Enable/disable creation of TCP session without SYN flag. all: Enable TCP session without SYN. data-only: Enable TCP session data only. disable: Disable TCP session without SYN. |
option | - |
| anti-replay | Enable/disable anti-replay check. enable: Enable anti-replay check. disable: Disable anti-replay check. |
option | - |
| utm-status | Enable AV/web/ips protection profile. enable: Enable setting. disable: Disable setting. |
option | - |
| inspection-mode | Policy inspection mode (Flow/proxy). Default is Flow mode. proxy: Proxy based inspection. flow: Flow based inspection. |
option | - |
| webcache | Enable/disable web cache. enable: Enable setting. disable: Disable setting. |
option | - |
| webcache-https | Enable/disable web cache for HTTPS. disable: Disable web cache for HTTPS. enable: Enable web cache for HTTPS. |
option | - |
| http-policy-redirect | Redirect HTTP(S) traffic to matching transparent web proxy policy. enable: Enable HTTP(S) policy redirect. disable: Disable HTTP(S) policy redirect. |
option | - |
| ssh-policy-redirect | Redirect SSH traffic to matching transparent proxy policy. enable: Enable SSH policy redirect. disable: Disable SSH policy redirect. |
option | - |
| webproxy-profile | Webproxy profile name. | string | Maximum length: 63 |
| profile-type | Determine whether the firewall policy allows security profile groups or single profiles only. single: Do not allow security profile groups. group: Allow security profile groups. |
option | - |
| profile-group | Name of profile group. | string | Maximum length: 35 |
| profile-protocol-options | Name of an existing Protocol options profile. | string | Maximum length: 35 |
| ssl-ssh-profile | Name of an existing SSL SSH profile. | string | Maximum length: 35 |
| av-profile | Name of an existing Antivirus profile. | string | Maximum length: 35 |
| webfilter-profile | Name of an existing Web filter profile. | string | Maximum length: 35 |
| dnsfilter-profile | Name of an existing DNS filter profile. | string | Maximum length: 35 |
| emailfilter-profile | Name of an existing email filter profile. | string | Maximum length: 35 |
| dlp-sensor | Name of an existing DLP sensor. | string | Maximum length: 35 |
| ips-sensor | Name of an existing IPS sensor. | string | Maximum length: 35 |
| application-list | Name of an existing Application list. | string | Maximum length: 35 |
| voip-profile | Name of an existing VoIP profile. | string | Maximum length: 35 |
| icap-profile | Name of an existing ICAP profile. | string | Maximum length: 35 |
| cifs-profile | Name of an existing CIFS profile. | string | Maximum length: 35 |
| waf-profile | Name of an existing Web application firewall profile. | string | Maximum length: 35 |
| ssh-filter-profile | Name of an existing SSH filter profile. | string | Maximum length: 35 |
| logtraffic | Enable or disable logging. Log all sessions or security profile sessions. all: Log all sessions accepted or denied by this policy. utm: Log traffic that has a security profile applied to it. disable: Disable all logging for this policy. |
option | - |
| logtraffic-start | Record logs when a session starts. enable: Enable setting. disable: Disable setting. |
option | - |
| auto-asic-offload | Enable/disable policy traffic ASIC offloading. enable: Enable auto ASIC offloading. disable: Disable ASIC offloading. |
option | - |
| np-acceleration | Enable/disable UTM Network Processor acceleration. enable: Enable UTM Network Processor acceleration. disable: Disable UTM Network Processor acceleration. |
option | - |
| webproxy-forward-server | Web proxy forward server name. | string | Maximum length: 63 |
| traffic-shaper | Reverse traffic shaper. | string | Maximum length: 35 |
| traffic-shaper-reverse | Reverse traffic shaper. | string | Maximum length: 35 |
| per-ip-shaper | Per-IP traffic shaper. | string | Maximum length: 35 |
application <id> |
Application ID list. Application IDs. |
integer | Minimum value: 0 Maximum value: 4294967295 |
app-category <id> |
Application category ID list. Category IDs. |
integer | Minimum value: 0 Maximum value: 4294967295 |
url-category <id> |
URL category ID list. URL category ID. |
integer | Minimum value: 0 Maximum value: 4294967295 |
app-group <name> |
Application group names. Application group names. |
string | Maximum length: 79 |
| nat | Enable/disable source NAT. enable: Enable setting. disable: Disable setting. |
option | - |
| fixedport | Enable to prevent source NAT from changing a session's source port. enable: Enable setting. disable: Disable setting. |
option | - |
| ippool | Enable to use IP Pools for source NAT. enable: Enable setting. disable: Disable setting. |
option | - |
poolname <name> |
IP Pool names. IP pool name. |
string | Maximum length: 79 |
| session-ttl | Session TTL in seconds for sessions accepted by this policy. 0 means use the system default session TTL. | integer | Minimum value: 300 Maximum value: 2764800 |
| inbound | Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN. enable: Enable setting. disable: Disable setting. |
option | - |
| outbound | Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN. enable: Enable setting. disable: Disable setting. |
option | - |
| natinbound | Policy-based IPsec VPN: apply destination NAT to inbound traffic. enable: Enable setting. disable: Disable setting. |
option | - |
| natoutbound | Policy-based IPsec VPN: apply source NAT to outbound traffic. enable: Enable setting. disable: Disable setting. |
option | - |
| send-deny-packet | Enable/disable return of deny-packet. enable: Enable setting. disable: Disable setting. |
option | - |
| vpntunnel | Policy-based IPsec VPN: name of the IPsec VPN Phase 1. | string | Maximum length: 35 |
| diffserv-forward | Enable to change packet's DiffServ values to the specified diffservcode-forward value. enable: Enable forward (original) traffic DiffServ. disable: Disable forward (original) traffic DiffServ. |
option | - |
| diffserv-reverse | Enable to change packet's reverse (reply) DiffServ values to the specified diffservcode-rev value. enable: Enable reverse (reply) traffic DiffServ. disable: Disable reverse (reply) traffic DiffServ. |
option | - |
| diffservcode-forward | Change packet's DiffServ to this value. | user | Not Specified |
| diffservcode-rev | Change packet's reverse (reply) DiffServ to this value. | user | Not Specified |
| tcp-mss-sender | Sender TCP maximum segment size (MSS). | integer | Minimum value: 0 Maximum value: 65535 |
| tcp-mss-receiver | Receiver TCP maximum segment size (MSS). | integer | Minimum value: 0 Maximum value: 65535 |
| comments | Comment. | var-string | Maximum length: 1023 |
| rsso | Enable/disable RADIUS single sign-on (RSSO). enable: Enable setting. disable: Disable setting. |
option | - |
custom-log-fields <field-id> |
Log field index numbers to append custom log fields to log messages for this policy. Custom log field. |
string | Maximum length: 35 |
| replacemsg-override-group | Override the default replacement message group for this policy. | string | Maximum length: 35 |
| srcaddr-negate | When enabled srcaddr specifies what the source address must NOT be. enable: Enable source address negate. disable: Disable destination address negate. |
option | - |
| dstaddr-negate | When enabled dstaddr specifies what the destination address must NOT be. enable: Enable source address negate. disable: Disable destination address negate. |
option | - |
| service-negate | When enabled service specifies what the service must NOT be. enable: Enable negated service match. disable: Disable negated service match. |
option | - |
groups <name> |
Names of user groups that can authenticate with this policy. Group name. |
string | Maximum length: 79 |
users <name> |
Names of individual users that can authenticate with this policy. Names of individual users that can authenticate with this policy. |
string | Maximum length: 79 |
| timeout-send-rst | Enable/disable sending RST packets when TCP sessions expire. enable: Send RST when session times out. disable: Donot send RST when session times out. |
option | - |
| ssl-mirror | Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring). enable: Enable SSL mirror. disable: Disable SSL mirror. |
option | - |
ssl-mirror-intf <name> |
SSL mirror interface name. Interface name. |
string | Maximum length: 79 |
| dsri | Enable DSRI to ignore HTTP server responses. enable: Enable DSRI. disable: Disable DSRI. |
option | - |
| vlan-filter | Set VLAN filters. | user | Not Specified |
config firewall policy6
Description: Configure IPv6 policies.
edit <policyid>
set name {string}
set uuid {uuid}
set srcintf <name1>, <name2>, ...
set dstintf <name1>, <name2>, ...
set srcaddr <name1>, <name2>, ...
set dstaddr <name1>, <name2>, ...
set action [accept|deny|...]
set firewall-session-dirty [check-all|check-new]
set status [enable|disable]
set vlan-cos-fwd {integer}
set vlan-cos-rev {integer}
set schedule {string}
set service <name1>, <name2>, ...
set tos {user}
set tos-mask {user}
set tos-negate [enable|disable]
set tcp-session-without-syn [all|data-only|...]
set anti-replay [enable|disable]
set utm-status [enable|disable]
set inspection-mode [proxy|flow]
set webcache [enable|disable]
set webcache-https [disable|enable]
set http-policy-redirect [enable|disable]
set ssh-policy-redirect [enable|disable]
set webproxy-profile {string}
set profile-type [single|group]
set profile-group {string}
set profile-protocol-options {string}
set ssl-ssh-profile {string}
set av-profile {string}
set webfilter-profile {string}
set dnsfilter-profile {string}
set emailfilter-profile {string}
set dlp-sensor {string}
set ips-sensor {string}
set application-list {string}
set voip-profile {string}
set icap-profile {string}
set cifs-profile {string}
set waf-profile {string}
set ssh-filter-profile {string}
set logtraffic [all|utm|...]
set logtraffic-start [enable|disable]
set auto-asic-offload [enable|disable]
set np-acceleration [enable|disable]
set webproxy-forward-server {string}
set traffic-shaper {string}
set traffic-shaper-reverse {string}
set per-ip-shaper {string}
set application <id1>, <id2>, ...
set app-category <id1>, <id2>, ...
set url-category <id1>, <id2>, ...
set app-group <name1>, <name2>, ...
set nat [enable|disable]
set fixedport [enable|disable]
set ippool [enable|disable]
set poolname <name1>, <name2>, ...
set session-ttl {integer}
set inbound [enable|disable]
set outbound [enable|disable]
set natinbound [enable|disable]
set natoutbound [enable|disable]
set send-deny-packet [enable|disable]
set vpntunnel {string}
set diffserv-forward [enable|disable]
set diffserv-reverse [enable|disable]
set diffservcode-forward {user}
set diffservcode-rev {user}
set tcp-mss-sender {integer}
set tcp-mss-receiver {integer}
set comments {var-string}
set rsso [enable|disable]
set custom-log-fields <field-id1>, <field-id2>, ...
set replacemsg-override-group {string}
set srcaddr-negate [enable|disable]
set dstaddr-negate [enable|disable]
set service-negate [enable|disable]
set groups <name1>, <name2>, ...
set users <name1>, <name2>, ...
set timeout-send-rst [enable|disable]
set ssl-mirror [enable|disable]
set ssl-mirror-intf <name1>, <name2>, ...
set dsri [enable|disable]
set vlan-filter {user}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| name | Policy name. | string | Maximum length: 35 |
| uuid | Universally Unique Identifier (UUID; automatically assigned but can be manually reset). | uuid | Not Specified |
srcintf <name> |
Incoming (ingress) interface. Interface name. |
string | Maximum length: 79 |
dstintf <name> |
Outgoing (egress) interface. Interface name. |
string | Maximum length: 79 |
srcaddr <name> |
Source address and address group names. Address name. |
string | Maximum length: 79 |
dstaddr <name> |
Destination address and address group names. Address name. |
string | Maximum length: 79 |
| action | Policy action (allow/deny/ipsec). accept: Allows session that match the firewall policy. deny: Blocks sessions that match the firewall policy. ipsec: Firewall policy becomes a policy-based IPsec VPN policy. |
option | - |
| firewall-session-dirty | How to handle sessions if the configuration of this firewall policy changes. check-all: Flush all current sessions accepted by this policy. These sessions must be started and re-matched with policies. check-new: Continue to allow sessions already accepted by this policy. |
option | - |
| status | Enable or disable this policy. enable: Enable setting. disable: Disable setting. |
option | - |
| vlan-cos-fwd | VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest | integer | Minimum value: 0 Maximum value: 7 |
| vlan-cos-rev | VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest | integer | Minimum value: 0 Maximum value: 7 |
| schedule | Schedule name. | string | Maximum length: 35 |
service <name> |
Service and service group names. Address name. |
string | Maximum length: 79 |
| tos | ToS (Type of Service) value used for comparison. | user | Not Specified |
| tos-mask | Non-zero bit positions are used for comparison while zero bit positions are ignored. | user | Not Specified |
| tos-negate | Enable negated TOS match. enable: Enable TOS match negate. disable: Disable TOS match negate. |
option | - |
| tcp-session-without-syn | Enable/disable creation of TCP session without SYN flag. all: Enable TCP session without SYN. data-only: Enable TCP session data only. disable: Disable TCP session without SYN. |
option | - |
| anti-replay | Enable/disable anti-replay check. enable: Enable anti-replay check. disable: Disable anti-replay check. |
option | - |
| utm-status | Enable AV/web/ips protection profile. enable: Enable setting. disable: Disable setting. |
option | - |
| inspection-mode | Policy inspection mode (Flow/proxy). Default is Flow mode. proxy: Proxy based inspection. flow: Flow based inspection. |
option | - |
| webcache | Enable/disable web cache. enable: Enable setting. disable: Disable setting. |
option | - |
| webcache-https | Enable/disable web cache for HTTPS. disable: Disable web cache for HTTPS. enable: Enable web cache for HTTPS. |
option | - |
| http-policy-redirect | Redirect HTTP(S) traffic to matching transparent web proxy policy. enable: Enable HTTP(S) policy redirect. disable: Disable HTTP(S) policy redirect. |
option | - |
| ssh-policy-redirect | Redirect SSH traffic to matching transparent proxy policy. enable: Enable SSH policy redirect. disable: Disable SSH policy redirect. |
option | - |
| webproxy-profile | Webproxy profile name. | string | Maximum length: 63 |
| profile-type | Determine whether the firewall policy allows security profile groups or single profiles only. single: Do not allow security profile groups. group: Allow security profile groups. |
option | - |
| profile-group | Name of profile group. | string | Maximum length: 35 |
| profile-protocol-options | Name of an existing Protocol options profile. | string | Maximum length: 35 |
| ssl-ssh-profile | Name of an existing SSL SSH profile. | string | Maximum length: 35 |
| av-profile | Name of an existing Antivirus profile. | string | Maximum length: 35 |
| webfilter-profile | Name of an existing Web filter profile. | string | Maximum length: 35 |
| dnsfilter-profile | Name of an existing DNS filter profile. | string | Maximum length: 35 |
| emailfilter-profile | Name of an existing email filter profile. | string | Maximum length: 35 |
| dlp-sensor | Name of an existing DLP sensor. | string | Maximum length: 35 |
| ips-sensor | Name of an existing IPS sensor. | string | Maximum length: 35 |
| application-list | Name of an existing Application list. | string | Maximum length: 35 |
| voip-profile | Name of an existing VoIP profile. | string | Maximum length: 35 |
| icap-profile | Name of an existing ICAP profile. | string | Maximum length: 35 |
| cifs-profile | Name of an existing CIFS profile. | string | Maximum length: 35 |
| waf-profile | Name of an existing Web application firewall profile. | string | Maximum length: 35 |
| ssh-filter-profile | Name of an existing SSH filter profile. | string | Maximum length: 35 |
| logtraffic | Enable or disable logging. Log all sessions or security profile sessions. all: Log all sessions accepted or denied by this policy. utm: Log traffic that has a security profile applied to it. disable: Disable all logging for this policy. |
option | - |
| logtraffic-start | Record logs when a session starts. enable: Enable setting. disable: Disable setting. |
option | - |
| auto-asic-offload | Enable/disable policy traffic ASIC offloading. enable: Enable auto ASIC offloading. disable: Disable ASIC offloading. |
option | - |
| np-acceleration | Enable/disable UTM Network Processor acceleration. enable: Enable UTM Network Processor acceleration. disable: Disable UTM Network Processor acceleration. |
option | - |
| webproxy-forward-server | Web proxy forward server name. | string | Maximum length: 63 |
| traffic-shaper | Reverse traffic shaper. | string | Maximum length: 35 |
| traffic-shaper-reverse | Reverse traffic shaper. | string | Maximum length: 35 |
| per-ip-shaper | Per-IP traffic shaper. | string | Maximum length: 35 |
application <id> |
Application ID list. Application IDs. |
integer | Minimum value: 0 Maximum value: 4294967295 |
app-category <id> |
Application category ID list. Category IDs. |
integer | Minimum value: 0 Maximum value: 4294967295 |
url-category <id> |
URL category ID list. URL category ID. |
integer | Minimum value: 0 Maximum value: 4294967295 |
app-group <name> |
Application group names. Application group names. |
string | Maximum length: 79 |
| nat | Enable/disable source NAT. enable: Enable setting. disable: Disable setting. |
option | - |
| fixedport | Enable to prevent source NAT from changing a session's source port. enable: Enable setting. disable: Disable setting. |
option | - |
| ippool | Enable to use IP Pools for source NAT. enable: Enable setting. disable: Disable setting. |
option | - |
poolname <name> |
IP Pool names. IP pool name. |
string | Maximum length: 79 |
| session-ttl | Session TTL in seconds for sessions accepted by this policy. 0 means use the system default session TTL. | integer | Minimum value: 300 Maximum value: 2764800 |
| inbound | Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN. enable: Enable setting. disable: Disable setting. |
option | - |
| outbound | Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN. enable: Enable setting. disable: Disable setting. |
option | - |
| natinbound | Policy-based IPsec VPN: apply destination NAT to inbound traffic. enable: Enable setting. disable: Disable setting. |
option | - |
| natoutbound | Policy-based IPsec VPN: apply source NAT to outbound traffic. enable: Enable setting. disable: Disable setting. |
option | - |
| send-deny-packet | Enable/disable return of deny-packet. enable: Enable setting. disable: Disable setting. |
option | - |
| vpntunnel | Policy-based IPsec VPN: name of the IPsec VPN Phase 1. | string | Maximum length: 35 |
| diffserv-forward | Enable to change packet's DiffServ values to the specified diffservcode-forward value. enable: Enable forward (original) traffic DiffServ. disable: Disable forward (original) traffic DiffServ. |
option | - |
| diffserv-reverse | Enable to change packet's reverse (reply) DiffServ values to the specified diffservcode-rev value. enable: Enable reverse (reply) traffic DiffServ. disable: Disable reverse (reply) traffic DiffServ. |
option | - |
| diffservcode-forward | Change packet's DiffServ to this value. | user | Not Specified |
| diffservcode-rev | Change packet's reverse (reply) DiffServ to this value. | user | Not Specified |
| tcp-mss-sender | Sender TCP maximum segment size (MSS). | integer | Minimum value: 0 Maximum value: 65535 |
| tcp-mss-receiver | Receiver TCP maximum segment size (MSS). | integer | Minimum value: 0 Maximum value: 65535 |
| comments | Comment. | var-string | Maximum length: 1023 |
| rsso | Enable/disable RADIUS single sign-on (RSSO). enable: Enable setting. disable: Disable setting. |
option | - |
custom-log-fields <field-id> |
Log field index numbers to append custom log fields to log messages for this policy. Custom log field. |
string | Maximum length: 35 |
| replacemsg-override-group | Override the default replacement message group for this policy. | string | Maximum length: 35 |
| srcaddr-negate | When enabled srcaddr specifies what the source address must NOT be. enable: Enable source address negate. disable: Disable destination address negate. |
option | - |
| dstaddr-negate | When enabled dstaddr specifies what the destination address must NOT be. enable: Enable source address negate. disable: Disable destination address negate. |
option | - |
| service-negate | When enabled service specifies what the service must NOT be. enable: Enable negated service match. disable: Disable negated service match. |
option | - |
groups <name> |
Names of user groups that can authenticate with this policy. Group name. |
string | Maximum length: 79 |
users <name> |
Names of individual users that can authenticate with this policy. Names of individual users that can authenticate with this policy. |
string | Maximum length: 79 |
| timeout-send-rst | Enable/disable sending RST packets when TCP sessions expire. enable: Send RST when session times out. disable: Donot send RST when session times out. |
option | - |
| ssl-mirror | Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring). enable: Enable SSL mirror. disable: Disable SSL mirror. |
option | - |
ssl-mirror-intf <name> |
SSL mirror interface name. Interface name. |
string | Maximum length: 79 |
| dsri | Enable DSRI to ignore HTTP server responses. enable: Enable DSRI. disable: Disable DSRI. |
option | - |
| vlan-filter | Set VLAN filters. | user | Not Specified |