Fortinet black logo

CLI Reference

switch-controller snmp-community

Configure FortiSwitch SNMP v1/v2c communities globally.

  config switch-controller snmp-community
      Description: Configure FortiSwitch SNMP v1/v2c communities globally.
      edit <id>
          set name {string}
          set status [disable|enable]
          config hosts
              Description: Configure IPv4 SNMP managers (hosts).
              edit <id>
                  set ip {user}
              next
          end
          set query-v1-status [disable|enable]
          set query-v1-port {integer}
          set query-v2c-status [disable|enable]
          set query-v2c-port {integer}
          set trap-v1-status [disable|enable]
          set trap-v1-lport {integer}
          set trap-v1-rport {integer}
          set trap-v2c-status [disable|enable]
          set trap-v2c-lport {integer}
          set trap-v2c-rport {integer}
          set events {option1}, {option2}, ...
      next
  end

config switch-controller snmp-community

Parameter Name Description Type Size
name SNMP community name. string Maximum length: 35
status Enable/disable this SNMP community.
disable: Disable SNMP community.
enable: Enable SNMP community.
option -
query-v1-status Enable/disable SNMP v1 queries.
disable: Disable SNMP v1 queries.
enable: Enable SNMP v1 queries.
option -
query-v1-port SNMP v1 query port (default = 161). integer Minimum value: 0 Maximum value: 65535
query-v2c-status Enable/disable SNMP v2c queries.
disable: Disable SNMP v2c queries.
enable: Enable SNMP v2c queries.
option -
query-v2c-port SNMP v2c query port (default = 161). integer Minimum value: 0 Maximum value: 65535
trap-v1-status Enable/disable SNMP v1 traps.
disable: Disable SNMP v1 traps.
enable: Enable SNMP v1 traps.
option -
trap-v1-lport SNMP v2c trap local port (default = 162). integer Minimum value: 0 Maximum value: 65535
trap-v1-rport SNMP v2c trap remote port (default = 162). integer Minimum value: 0 Maximum value: 65535
trap-v2c-status Enable/disable SNMP v2c traps.
disable: Disable SNMP v2c traps.
enable: Enable SNMP v2c traps.
option -
trap-v2c-lport SNMP v2c trap local port (default = 162). integer Minimum value: 0 Maximum value: 65535
trap-v2c-rport SNMP v2c trap remote port (default = 162). integer Minimum value: 0 Maximum value: 65535
events SNMP notifications (traps) to send.
cpu-high: Send a trap when CPU usage too high.
mem-low: Send a trap when available memory is low.
log-full: Send a trap when log disk space becomes low.
intf-ip: Send a trap when an interface IP address is changed.
ent-conf-change: Send a trap when an entity MIB change occurs (RFC4133).
option -

config hosts

Parameter Name Description Type Size
ip IPv4 address of the SNMP manager (host). user Not Specified

Configure FortiSwitch SNMP v1/v2c communities globally.

  config switch-controller snmp-community
      Description: Configure FortiSwitch SNMP v1/v2c communities globally.
      edit <id>
          set name {string}
          set status [disable|enable]
          config hosts
              Description: Configure IPv4 SNMP managers (hosts).
              edit <id>
                  set ip {user}
              next
          end
          set query-v1-status [disable|enable]
          set query-v1-port {integer}
          set query-v2c-status [disable|enable]
          set query-v2c-port {integer}
          set trap-v1-status [disable|enable]
          set trap-v1-lport {integer}
          set trap-v1-rport {integer}
          set trap-v2c-status [disable|enable]
          set trap-v2c-lport {integer}
          set trap-v2c-rport {integer}
          set events {option1}, {option2}, ...
      next
  end

config switch-controller snmp-community

Parameter Name Description Type Size
name SNMP community name. string Maximum length: 35
status Enable/disable this SNMP community.
disable: Disable SNMP community.
enable: Enable SNMP community.
option -
query-v1-status Enable/disable SNMP v1 queries.
disable: Disable SNMP v1 queries.
enable: Enable SNMP v1 queries.
option -
query-v1-port SNMP v1 query port (default = 161). integer Minimum value: 0 Maximum value: 65535
query-v2c-status Enable/disable SNMP v2c queries.
disable: Disable SNMP v2c queries.
enable: Enable SNMP v2c queries.
option -
query-v2c-port SNMP v2c query port (default = 161). integer Minimum value: 0 Maximum value: 65535
trap-v1-status Enable/disable SNMP v1 traps.
disable: Disable SNMP v1 traps.
enable: Enable SNMP v1 traps.
option -
trap-v1-lport SNMP v2c trap local port (default = 162). integer Minimum value: 0 Maximum value: 65535
trap-v1-rport SNMP v2c trap remote port (default = 162). integer Minimum value: 0 Maximum value: 65535
trap-v2c-status Enable/disable SNMP v2c traps.
disable: Disable SNMP v2c traps.
enable: Enable SNMP v2c traps.
option -
trap-v2c-lport SNMP v2c trap local port (default = 162). integer Minimum value: 0 Maximum value: 65535
trap-v2c-rport SNMP v2c trap remote port (default = 162). integer Minimum value: 0 Maximum value: 65535
events SNMP notifications (traps) to send.
cpu-high: Send a trap when CPU usage too high.
mem-low: Send a trap when available memory is low.
log-full: Send a trap when log disk space becomes low.
intf-ip: Send a trap when an interface IP address is changed.
ent-conf-change: Send a trap when an entity MIB change occurs (RFC4133).
option -

config hosts

Parameter Name Description Type Size
ip IPv4 address of the SNMP manager (host). user Not Specified