Fortinet black logo

CLI Reference

firewall multicast-policy6

Configure IPv6 multicast NAT policies.

  config firewall multicast-policy6
      Description: Configure IPv6 multicast NAT policies.
      edit <id>
          set status [enable|disable]
          set logtraffic [enable|disable]
          set srcintf {string}
          set dstintf {string}
          set srcaddr <name1>, <name2>, ...
          set dstaddr <name1>, <name2>, ...
          set action [accept|deny]
          set protocol {integer}
          set start-port {integer}
          set end-port {integer}
          set auto-asic-offload [enable|disable]
      next
  end

config firewall multicast-policy6

Parameter Name Description Type Size
status Enable/disable this policy.
enable: Enable this policy.
disable: Disable this policy.
option -
logtraffic Enable/disable logging traffic accepted by this policy.
enable: Enable logging traffic accepted by this policy.
disable: Disable logging traffic accepted by this policy.
option -
srcintf IPv6 source interface name. string Maximum length: 35
dstintf IPv6 destination interface name. string Maximum length: 35
srcaddr <name> IPv6 source address name.
Address name.
string Maximum length: 79
dstaddr <name> IPv6 destination address name.
Address name.
string Maximum length: 79
action Accept or deny traffic matching the policy.
accept: Accept.
deny: Deny.
option -
protocol Integer value for the protocol type as defined by IANA (0 - 255, default = 0). integer Minimum value: 0 Maximum value: 255
start-port Integer value for starting TCP/UDP/SCTP destination port in range (1 - 65535, default = 1). integer Minimum value: 0 Maximum value: 65535
end-port Integer value for ending TCP/UDP/SCTP destination port in range (1 - 65535, default = 65535). integer Minimum value: 0 Maximum value: 65535
auto-asic-offload Enable/disable offloading policy traffic for hardware acceleration.
enable: Enable offloading policy traffic for hardware acceleration.
disable: Disable offloading policy traffic for hardware acceleration.
option -

Configure IPv6 multicast NAT policies.

  config firewall multicast-policy6
      Description: Configure IPv6 multicast NAT policies.
      edit <id>
          set status [enable|disable]
          set logtraffic [enable|disable]
          set srcintf {string}
          set dstintf {string}
          set srcaddr <name1>, <name2>, ...
          set dstaddr <name1>, <name2>, ...
          set action [accept|deny]
          set protocol {integer}
          set start-port {integer}
          set end-port {integer}
          set auto-asic-offload [enable|disable]
      next
  end

config firewall multicast-policy6

Parameter Name Description Type Size
status Enable/disable this policy.
enable: Enable this policy.
disable: Disable this policy.
option -
logtraffic Enable/disable logging traffic accepted by this policy.
enable: Enable logging traffic accepted by this policy.
disable: Disable logging traffic accepted by this policy.
option -
srcintf IPv6 source interface name. string Maximum length: 35
dstintf IPv6 destination interface name. string Maximum length: 35
srcaddr <name> IPv6 source address name.
Address name.
string Maximum length: 79
dstaddr <name> IPv6 destination address name.
Address name.
string Maximum length: 79
action Accept or deny traffic matching the policy.
accept: Accept.
deny: Deny.
option -
protocol Integer value for the protocol type as defined by IANA (0 - 255, default = 0). integer Minimum value: 0 Maximum value: 255
start-port Integer value for starting TCP/UDP/SCTP destination port in range (1 - 65535, default = 1). integer Minimum value: 0 Maximum value: 65535
end-port Integer value for ending TCP/UDP/SCTP destination port in range (1 - 65535, default = 65535). integer Minimum value: 0 Maximum value: 65535
auto-asic-offload Enable/disable offloading policy traffic for hardware acceleration.
enable: Enable offloading policy traffic for hardware acceleration.
disable: Disable offloading policy traffic for hardware acceleration.
option -