Application Control

Application control sensors can be created and managed from SDWan Overlay > Security profiles > Application Control tab. See Application control in the FortiOS Administration Guide for more information.

To create a new application control sensor:

1. Go to the SDWan Overlay > Security profiles > Application Control tab.

2. Click Create. The New Application Sensor page is displayed.

3. Enter the Name.

4. Enter a Description.

5. Edit the Categories as desired.

6. Enable Network Protocol Enforcement.

   1. Click Create.

   2. Configure the network service.

   3. Click OK.

7. Click Create for Application Overrides. See Basic category filters and overrides in the FortiOS Administration Guide.

   1. Configure the override.

      Application signatures can also be viewed in the Policy > Security Profiles > Application Signatures tab. See Application signatures.

   2. Click OK.

8. Enable the desired Options.

9. Click OK.

To edit a sensor:

1. Go to the SDWan Overlay > Security profiles > Application Control tab.

2. Select the desired sensor.

3. Click Edit.

4. Edit the sensor as desired.

5. Click OK.

To delete a sensor:

1. Go to the SDWan Overlay > Security profiles > Application Control tab.

2. Select the desired sensor.

3. Click Delete. A confirmation dialog is displayed.

4. Click OK.