Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • Administration Guide

    Home FortiDeceptor 3.1.0 Administration Guide
    3.1.0
    6.0.1
    6.0.0
    5.3.2
    5.3.1
    5.3.0
    5.2.0
    5.1.0
    5.0.0
    4.3.0
    4.2.0
    4.1.1
    4.1.0
    4.0.2
    4.0.1
    4.0.0
    3.3.3
    3.3.2
    3.3.1
    3.3.0
    3.2.2
    3.2.1
    3.2.0
    3.1.1
    3.1.0
    3.0.2
    3.0.1
    3.0.0
    2.1.0
    2.0.0
    1.1.0
    1.0.1

    Interfaces

    Interfaces

    To view and manage interfaces, go to Network > Interfaces.

    This page displays the following information and options:

    Interface

    The interface name and description.

    Failover IP is listed under this field with the descriptor: (cluster external port).

    port1 (administration port)

    Port1 is hard-coded as the administration interface. You can enable or disable HTTP, SSH, and Telnet access rights on port1. HTTPS is enabled by default. You can use port1 for Device mode although a different, dedicated port is recommended.

    port2

    Decoy VM deployment.

    port3

    Decoy VM deployment.

    port4

    Decoy VM deployment.

    port5/port6

    Decoy VM deployment.

    port7/port8

    Decoy VM deployment.

    IPv4

    The IPv4 IP address and subnet mask of the interface.

    IPv6

    The IPv6 IP address and subnet mask of the interface.

    Interface Status

    The state of the interface:

    • Interface up
    • Interface down
    • Interface is being used by sniffer

    Link Status

    The link status:

    • Link up
    • Link down

    Access Rights

    The access rights associated with the interface. HTTPS is enabled by default on port1. You can enable HTTP, SSH, and Telnet access on port1.

    Edit

    Select the interface and click Edit in the toolbar to edit the interface.
    To edit an interface:
    1. Select the IPv4 or IPv6 address of an interface name and click Edit in the toolbar.
    2. Edit the IP Address / Netmask.
    3. If you want, you can change the Interface Status.
    4. Click OK.
    To edit administrative access:
    1. Select port1 (administration port) and click Edit in the toolbar.
    2. Edit the Access Rights.

      HTTPS is enabled by default. You can also enable HTTP, SSH, and Telnet support.

    3. If necessary, edit the IP Address / Netmask.
    4. Click OK.
    Previous
    Next

    Interfaces

    Interfaces

    To view and manage interfaces, go to Network > Interfaces.

    This page displays the following information and options:

    Interface

    The interface name and description.

    Failover IP is listed under this field with the descriptor: (cluster external port).

    port1 (administration port)

    Port1 is hard-coded as the administration interface. You can enable or disable HTTP, SSH, and Telnet access rights on port1. HTTPS is enabled by default. You can use port1 for Device mode although a different, dedicated port is recommended.

    port2

    Decoy VM deployment.

    port3

    Decoy VM deployment.

    port4

    Decoy VM deployment.

    port5/port6

    Decoy VM deployment.

    port7/port8

    Decoy VM deployment.

    IPv4

    The IPv4 IP address and subnet mask of the interface.

    IPv6

    The IPv6 IP address and subnet mask of the interface.

    Interface Status

    The state of the interface:

    • Interface up
    • Interface down
    • Interface is being used by sniffer

    Link Status

    The link status:

    • Link up
    • Link down

    Access Rights

    The access rights associated with the interface. HTTPS is enabled by default on port1. You can enable HTTP, SSH, and Telnet access on port1.

    Edit

    Select the interface and click Edit in the toolbar to edit the interface.
    To edit an interface:
    1. Select the IPv4 or IPv6 address of an interface name and click Edit in the toolbar.
    2. Edit the IP Address / Netmask.
    3. If you want, you can change the Interface Status.
    4. Click OK.
    To edit administrative access:
    1. Select port1 (administration port) and click Edit in the toolbar.
    2. Edit the Access Rights.

      HTTPS is enabled by default. You can also enable HTTP, SSH, and Telnet support.

    3. If necessary, edit the IP Address / Netmask.
    4. Click OK.
    Previous
    Next