Use the Deception > Deployment Network page to set up a monitoring interface into a VLAN or a subnet.
- Go to Deception > Deployment Network.
- Enable Auto VLAN Detection to automatically detect the VLANs on your network.
Auto VLAN detection allows FortiDeceptor to detect the available VLANs on the deployment network interface and display them in the GUI. You can select and add the VLANs for the deployment of Decoys later.
- Select the Detection Interface and click OK.
You can select multiple ports.
- Click Add New VLAN/Subnet to manually add a VLAN or a subnet. Configure the following settings:
The port that connects to the VLAN or subnet.
The VLAN's unique integer ID.
Deploy Network IP/Mask
The number of objects referring to this object.
Status of the IP address, such as if it is initialized.
Click Edit to edit the VLAN or subnet entry. The Edit button is visible only after the entry is saved.
- Click Save.
The network IP/mask must be an IP address and not a subnet.
You must use the following guidelines to set the network IP/mask: