Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • Administration Guide

    Home FortiDeceptor 2.0.0 Administration Guide
    2.0.0
    6.0.1
    6.0.0
    5.3.2
    5.3.1
    5.3.0
    5.2.0
    5.1.0
    5.0.0
    4.3.0
    4.2.0
    4.1.1
    4.1.0
    4.0.2
    4.0.1
    4.0.0
    3.3.3
    3.3.2
    3.3.1
    3.3.0
    3.2.2
    3.2.1
    3.2.0
    3.1.1
    3.1.0
    3.0.2
    3.0.1
    3.0.0
    2.1.0
    2.0.0
    1.1.0
    1.0.1

    Connect to the GUI

    Connect to the GUI

    The FortiDeceptor unit is configured and managed using the GUI. This section will step you through connecting to the unit via the GUI.

    To connect to the FortiDeceptor GUI:
    1. Connect the port1 (administration) interface of the device to a management computer using the provided Ethernet cable.
    2. Configure the management computer to be on the same subnet as the internal interface of the FortiDeceptor unit:
      1. Change the IP address of the management computer to 192.168.0.2 and the network mask to 255.255.255.0.
    3. Start a supported web browser and browse to https://192.168.0.99.
    4. Type admin in the Name field, leave the Password field blank, and select Login.

      You can now proceed with configuring your FortiDeceptor unit.

    If the network interfaces have been configured differently during installation, the URL and/or permitted administrative access protocols may no longer be in their default state.

    Previous
    Next

    Connect to the GUI

    Connect to the GUI

    The FortiDeceptor unit is configured and managed using the GUI. This section will step you through connecting to the unit via the GUI.

    To connect to the FortiDeceptor GUI:
    1. Connect the port1 (administration) interface of the device to a management computer using the provided Ethernet cable.
    2. Configure the management computer to be on the same subnet as the internal interface of the FortiDeceptor unit:
      1. Change the IP address of the management computer to 192.168.0.2 and the network mask to 255.255.255.0.
    3. Start a supported web browser and browse to https://192.168.0.99.
    4. Type admin in the Name field, leave the Password field blank, and select Login.

      You can now proceed with configuring your FortiDeceptor unit.

    If the network interfaces have been configured differently during installation, the URL and/or permitted administrative access protocols may no longer be in their default state.

    Previous
    Next