Enter a description of the configuration.

Select the appropriate output for your target Fortinet device.

The configuration syntax is slightly different among FortiOS 6.4, 7.0, 7.2, and 7.4. Select the version that corresponds to the FortiOS version on the target.

Select the input file

If there are many devices to be converted where all of them are the same model, sharing the same interface mapping relationship in conversion, then bulk conversion can convert all of them at once. Collect all the configuration files to be converted, compress them into a ZIP file and use the ZIP file as the input.

Select the model of the target device, or select a device connected to FortiConverter.

Specifies whether addresses, schedules, and services that are not referenced by a policy are saved and added to the output. This option can be useful if your target device has table size limitations. You can view the unreferenced objects that FortiConverter removed in the Tuning page.

You can customize the maximum table sizes that

FortiConverter uses when Adjust table sizes is selected. For more information, see Adjusting table sizes

When selected, the serial number of firewall policies will start from 1 instead of 10000.

When selected, the conversion will be in NGFW policy-based mode.

"firewall policy" will become "firewall security-policy" instead, and "set application 00000" will be generated in policies, which requires manual processing. There will also be some other minor differences adapted for the NGFW policy-based CLI.