Bluecoat Interface Mapping

You can manually map the interface.

• To select the appropriate FortiGate interface, click the value in the FortiGate Interface column, and then select a value or enter a custom interface name.
• To edit other values, double-click the proper column. Use the toolbar icon on the right to show and hide columns. You can also use the Tuning page to create mappings after the conversion is complete.
• To import a set of interface mappings from a file, click Import.
• To download the current set of interface mappings, click Export.
• To delete an interface, select the entries you would like to delete, right click and select Delete Selected. This is useful if your target FortiGate has fewer interfaces than the source configuration.

The limit of the length of interface names in FortiOS is 15 characters. Interfaces in the source config which have longer names should be trimmed to a shorter name. It is recommended to trim the names manually to ensure readability. But if a quick trimming is needed, please select the entries, right click and select Trim Interface Name to trim the names into 15 characters automatically.

Setting	Description
VDOM	Shows the virtual domains used in the conversion. ("root" by default)
Source Interface	Shows each interface on the Bluecoat firewall.
FortiGate Interface	The input field for corresponding FortiGate interface names. Click to assign a FortiGate port or input the interface name manually for each interface. (Only available when the output format is FortiGate)
Normalized interface	The input field for corresponding normalized interface names, which would be configured in the ADOM database in FortiManager. Click to assign a port or input the interface name manually for each interface. (Only available when the output format is FortiManager)
Device interface	The input field for corresponding interface names in the managed devices in FortiManager. Click to assign a port or input the interface name manually for each interface. (Only available when the output format is FortiManager)
Members	Shows any members, if they are set.
IP-Netmask	Shows the IP address and netmask of the connection.
Type	Shows the type of interface.
Access	Shows which protocols has permission to access each interface.
Import	Click to load a set of interface mappings from a text file.
Export	Saves the current set of interface mappings to a text file.
Delete Selected	Click to delete the selected mapping item.
Trim Interface Name	Trim the interface names which exceed 15 characters into 15 characters automatically.