Context selection
This page shows the source configuration before conversion.
By default, all virtual contexts are mapped to VDOMs with the same name.
Click an option under Source Configuration Preview to view it. Use the search bars to filter the search.
| Setting | Description |
| VDOM Select | Select/Unselect the VDOM item. |
| VDOM Rename | Rename the VDOM name. |
|
VDOM Mode |
Change the VDOM mode in the output result. |
| Information of Configurations | Source configuration file names are shown in the table as a link. Click the link to see the content. The file won’t show if it’s too large. |
|
Unreferenced Access List |
When the option "Collect unreferenced access lists" is selected, FortiConverter collect access lists which are not referenced in the configuration. If you need to convert some of them into firewall policies, please select those access lists in the table. |
|
Managed Device Name |
The name of the managed device which the converted interface or route configuration would be imported in FortiManager. (Only available when the output format is FortiManager) |
|
Manage IP |
When the context is configured in transparent mode, the management IP needs to be input for the converted FortiGate VDOM. |
|
Target Device Switch Interface - Interface/Port |
If there are virtual switches in the selected target device, FortiConverter will list the member ports of the virtual switches. If an interface in the list is going to be used in the configuration, it should first be detached from the virtual switch. Click "X" on the interface to detach it. Please note that a detached interface cannot be re-added later by FortiConverter. |
| Source Configuration Preview | The numbers of each type of firewall object are shown in the preview table. Click the object number to see detailed information on each object. In each type of object, click the button Export CSV to export the current object info as CSV file. |