Use this command to configure RADIUS queries used to authenticate end-users and/or administrators.
|If you use a RADIUS query for administrators, separate it from the queries for regular users. Do not combine administrator and user queries into a single entry. Failure to separate queries will allow end-users to have administrative access the FortiWeb web UI and CLI.|
Remote Authentication and Dial-in User Service (RADIUS) servers provide authentication, authorization, and accounting functions. The FortiWeb authentication feature uses RADIUS user queries to authenticate and authorize HTTP requests. (The HTTP protocol does not support active logouts, and can only passively log out users when their connection times out. Therefore FortiWeb does not fully support RADIUS accounting.) RADIUS authentication with realms (e.g., the person logs in with an account such as firstname.lastname@example.org) are supported.
To authenticate a user, the FortiWeb appliance sends the user’s credentials to RADIUS for authentication. If RADIUS authentication succeeds, the user is successfully authenticated with the FortiWeb appliance. If RADIUS authentication fails, the appliance refuses the connection. To override the default authentication scheme, select a specific authentication protocol or change the default RADIUS port.
To incorporate RADIUS users, they must be in a user group selected within an authentication rule, which is in turn selected within an authentication policy. For details, see server-policy custom-application application-policy.
|For access profiles, FortiWeb appliances support RFC 2548 (HTTP://www.ietf.org/rfc/rfc2548.txt) Microsoft Vendor-specific RADIUS Attributes. If you do not want to use them, you can configure them locally instead. For details, see system accprofile.|
To use this command, your administrator account’s access control profile must have either
rw permission to the
authusergrp area. For details, see Permissions.
config user radius-user
Enter a unique name that can be referenced in other parts of the configuration.
Do not use spaces or special characters. The maximum length is 63 characters.
To display the list of existing queries, enter:
|Enter the RADIUS server secret key for the primary RADIUS server. The primary server secret key should be a maximum of 16 characters in length, but is allowed to be up to 63 characters.||No default.|
|Enter the IP address or domain name of the RADIUS server to query for users.||No default.|
|Enter the port number where the RADIUS server listens. The valid range is 1–65535.||
|Enter the authentication method. The
|Enter the NAS IP address and called station ID. For details, see RFC 2548 (HTTP://www.ietf.org/rfc/rfc2548.txt). If you do not enter an IP address, the IP address of the network interface that the FortiWeb appliance uses to communicate with the RADIUS server is applied.||
|Enter the RADIUS server secret key for the secondary RADIUS server. The secondary server secret key should be a maximum of 16 characters in length, but is allowed to be up to 63 characters.||No default.|
|Enter the IP address or domain name of the secondary RADIUS server.||No default.|
|Enter the port number where the secondary RADIUS server listens. The valid range is 1–65535.||
If you are using FAC Radius server to authenticate clients, you can enable this option to send FortiToken mobile notification automatically to clients for extra token authentication.