Fortinet black logo

CLI Reference

debug crashlog

debug crashlog

Use this command to show crash logs from application proxies that have call back traces, segmentation faults, or memory register dumps, or to delete the crash log.

Before you will be able to see any debug logs, you must first enable debug log output using the command enable-debug-log {enable | disable}.

To use this command, your administrator account’s access control profile requires only r permission in any profile area. For details, see Permissions.

Syntax

diagnose debug crashlog show

diagnose debug crashlog clear

Example

diagnose debug crashlog show

Output similar to the following appears in the CLI:

2011-02-08 06:20:46 <18632> firmware FortiWeb-1000B 4.20,build0403,110131

2011-02-08 06:20:46 <18632> application proxy

2011-02-08 06:20:46 <18632> *** signal 11 (Segmentation fault) received ***

2011-02-08 06:20:46 <18632> Register dump:

2011-02-08 06:20:46 <18632> RAX: 00000000 RBX: 00000001 RCX: 00000001 RDX: 00000001

2011-02-08 06:20:46 <18632> RSI: 008d91a4 RDI: 00000000 RBP: 2b8f90ee2b10 RSP: 0072af60

2011-02-08 06:20:46 <18632> RIP: 008d8660 EFLAGS: 2b8f9aaa0010

2011-02-08 06:20:46 <18632> CS: 86b0 FS: 0000 GS: 008d

2011-02-08 06:20:46 <18632> Trap: 7fff26859ee0 Error: 008d8710 OldMask: 00440f90

2011-02-08 06:20:46 <18632> CR2: 00010202

2011-02-08 06:20:46 <18632> Backtrace:

2011-02-08 06:20:46 <18632> [0x008d8660] => /bin/xmlproxy (g_proxy+0x00000000)

2011-02-08 06:20:46 proxy received SEGV signal - 11

debug crashlog

Use this command to show crash logs from application proxies that have call back traces, segmentation faults, or memory register dumps, or to delete the crash log.

Before you will be able to see any debug logs, you must first enable debug log output using the command enable-debug-log {enable | disable}.

To use this command, your administrator account’s access control profile requires only r permission in any profile area. For details, see Permissions.

Syntax

diagnose debug crashlog show

diagnose debug crashlog clear

Example

diagnose debug crashlog show

Output similar to the following appears in the CLI:

2011-02-08 06:20:46 <18632> firmware FortiWeb-1000B 4.20,build0403,110131

2011-02-08 06:20:46 <18632> application proxy

2011-02-08 06:20:46 <18632> *** signal 11 (Segmentation fault) received ***

2011-02-08 06:20:46 <18632> Register dump:

2011-02-08 06:20:46 <18632> RAX: 00000000 RBX: 00000001 RCX: 00000001 RDX: 00000001

2011-02-08 06:20:46 <18632> RSI: 008d91a4 RDI: 00000000 RBP: 2b8f90ee2b10 RSP: 0072af60

2011-02-08 06:20:46 <18632> RIP: 008d8660 EFLAGS: 2b8f9aaa0010

2011-02-08 06:20:46 <18632> CS: 86b0 FS: 0000 GS: 008d

2011-02-08 06:20:46 <18632> Trap: 7fff26859ee0 Error: 008d8710 OldMask: 00440f90

2011-02-08 06:20:46 <18632> CR2: 00010202

2011-02-08 06:20:46 <18632> Backtrace:

2011-02-08 06:20:46 <18632> [0x008d8660] => /bin/xmlproxy (g_proxy+0x00000000)

2011-02-08 06:20:46 proxy received SEGV signal - 11