hardware check

Use this command to check the appliance hardware for errors. In the case of FortiWeb, this command checks virtual hardware—the vCPUs.

For example, to troubleshoot a logging problem, use the following command to check the log disk for errors:

diagnose hardware check logdisk

If the disk does not pass the check, it is likely the source of the problem.

Syntax

diagnose hardware check {all |cp8 |cpu |logdisk | memory |nic}

Variable	Description	Default
{all |cp8 |cpu |logdisk | memory |nic}	Enter the type of hardware to check, or enter all to check all hardware. For FortiWeb-VM versions, the cp8 option is not available. Note: Only some hardware platforms support diagnose hardware check.	No default.

Example

The following command checks the log disk:

diagnose hardware check logdisk

Output similar to the following appears in the CLI:

logdisk check Pass

size Pass 1952

disk-number Pass 2

raid-level Pass raid1