Applying the branch configuration

Use this procedure to apply the branch configuration from the main office FortiVoice phone system to the FortiVoice LSG unit and if present, its associated FortiVoice FXS, FXO, or PRI gateway.

Procedure steps

1. Connect to the GUI of the primary FortiVoice phone system at the main office.
2. Go to Managed System > Survivability.
3. On the Survivability Branch tab, select the branch to which you want to apply the configuration.
4. Click Actions > Apply Configuration.

   If a gateway is not linked to a survivability branch, a dialog box displays the following message:

   Do you want to update the selected gateway?

   If a gateway is linked to a survivability branch, a dialog box displays the following message:

   Do you want to apply the configuration to both the selected LSG and associated gateway?

5. To confirm, click OK.

   When the configuration changes are complete, a dialog box displays the following message:

   The gateway update is complete.

6. Click OK.

   You have completed this procedure.

7. Go to Verifying the heartbeat status.