Deployment
|
Before starting procedures in this guide, make sure to complete the basic setup of the FortiVoice phone system and connect to the GUI of that system. For more details, see the FortiVoice Phone System Administration Guide. |
To deploy a PRI gateway and then manage that device with a FortiVoice phone system, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the PRI gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the PRI gateway:
|
|
|
Task 2 |
Connect to the GUI of the PRI gateway. |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the PRI gateway to the latest GA release. |
|
|
Perform tasks 5 to 11 on the FortiVoice phone system, as applicable. |
||
|
Task 5 |
Add a PRI gateway. The FortiVoice phone system can auto-discover a PRI gateway when they are both on the same LAN. |
Perform one of the following procedures: |
|
Task 6 |
Apply the gateway configuration file from the FortiVoice phone system to the PRI gateway. |
|
|
Task 7 |
Verify that the SIP communication between the FortiVoice phone system and the PRI gateway is successful and that a PRI trunk exists between the PRI gateway and the public phone network. |
|
|
Task 8 |
Add a trunk profile to an inbound dial plan. |
|
|
Task 9 |
Add a trunk profile to an outbound dial plan. |
|
|
Task 10 |
Optionally, edit a trunk profile. |
Optional - Editing a trunk profile for a PRI gateway |
|
Task 11 |
Optionally, create additional trunk profiles. |
Optional - Creating an additional trunk profile for a FortiVoice Gateway GT02 |