Deployment
|
Before starting procedures in this guide, make sure to complete the basic setup of the FortiVoice phone system and connect to the web-based manager of that system. For more details, see the FortiVoice Phone System Administration Guide. |
To deploy a PRI gateway and then manage that device with a FortiVoice phone system, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the PRI gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the PRI gateway:
|
|
|
Task 2 |
Connect to the web-based manager of the PRI gateway. |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the PRI gateway to the latest GA release. |
|
|
Perform tasks 5 to 11 on the FortiVoice phone system, as applicable. |
||
|
Task 5 |
Add a PRI gateway. The FortiVoice phone system can auto-discover a PRI gateway when they are both on the same LAN. |
Perform one of the following procedures: |
|
Task 6 |
Apply the gateway configuration file from the FortiVoice phone system to the PRI gateway. |
|
|
Task 7 |
Verify that the SIP communication between the FortiVoice phone system and the PRI gateway is successful and that a PRI trunk exists between the PR gateway and the public phone network. |
|
|
Task 8 |
Add a trunk profile to an inbound dial plan. |
|
|
Task 9 |
Add a trunk profile to an outbound dial plan. |
|
|
Task 10 |
Optionally, edit a trunk profile. |
Optional - Editing a trunk profile for a PRI gateway |
|
Task 11 |
Optionally, create additional trunk profiles. |
Optional - Creating an additional trunk profile for a FortiVoice Gateway GT02 |