Use this procedure to apply the branch paging configuration from the main office FortiVoice phone system to the FortiVoice LSG unit and if present, its associated FortiVoice FXS gateway.
- Connect to the web-based manager of the primary FortiVoice phone system at the main office.
- Go to Managed System > Survivability.
- On the Survivability Branch tab, select the branch to which you want to apply the configuration.
- Click Apply Configuration.
If the FXS gateway is not linked to a survivability branch, a dialog box displays the following message:
Do you really want to update selected gateway?
If the FXS gateway is linked to a survivability branch, a dialog box displays the following message:
The config would be applied to both LSG and GW's. Do you really want to update selected gateway?
- To confirm, click OK.
When the configuration changes are complete and successful, a dialog box displays the following message:
Gateway upgrade finished.
Successful:<configured_branch_name>, <configured_FXS_gateway, if applicable>.
- Click OK.
You have completed the configuration changes for branch paging.