Deployment
|
Before starting procedures in this guide, make sure to complete the basic setup of FortiVoice Cloud and connect to its GUI. For details, see the FortiVoice Cloud Basic Administration Guide and FortiVoice Cloud Advanced Administration Guide. |
To deploy an FXS gateway and then manage that device with FortiVoice Cloud, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the FXS gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the FXS gateway:
|
|
|
Task 2 |
Connect to the GUI of the FXS gateway. |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the FXS gateway to the latest GA release. |
|
|
Perform tasks 5 to 9 on FortiVoice Cloud, as applicable. |
||
|
Task 5 |
Add an FXS gateway. |
|
|
Task 6 |
Optionally, edit an FXS gateway. |
|
|
Task 7 |
Apply the gateway configuration file from FortiVoice Cloud to the FXS gateway. |
|
|
Task 8 |
Verify that the FXS gateway is associated correctly with FortiVoice Cloud. |
|
|
Task 9 |
Optionally, edit any of the 16 default managed extensions. |
|