Starting an SSL-VPN RPS test

This test establishes a SSL-VPN tunnel connection and completes multiple full of HTTP transaction through it. It creates multiple HTTP transaction per tunnel.

To start an SSL-VPN tunnel RPS test:

Go to Cases > Performance Testing> VPN> SSL-VPN > RPS to display the test case summary page.
Click + Create New to display the Select case options dialog box.
Configure the Inner Traffic and click OK to continue.

Set the server network to Peer Network.

If FortiGate SSLVPN policy has disabled NAT mode, you need set the Internal IP assigned by FortiGate.

If FortiGate SSLVPN policy has enabled NAT mode, you need to set a peer IP.

Set Specifics for Load and Client. See the table below.

Set Inner protocol case Specifics >HTTPCPS.

Simulated Users

Number of simusers in a Tunnel.

SSL-VPN RPS test case options

For details about the common options for SSL-VPN cases, see VPN test case common options.

Settings	Guidelines
Basic Information
VPN Host Group	Specify VPN hosts defined under Objects > Host Group. A Host Group is comprised of Hosts e.g. abc.com = 1.1.1.1 . FortiTester will inject the hosts configured into SNI field (server name indication) within the TLS handshake.
Load
Mode	Simuser: Simulated users. Simuser simulates a user processing through an actions list one at a time. It allows you to determine the maximum number of concurrent users your device, infrastructure, or system can handle. Connections/second: This mode simulates TCP connections, each of them containing up to hundreds of transactions. It's useful to test how many concurrent connections can be handled by your device. NOTE: If you want FortiTester to create connections as fast as possible, set Mode to Simuser. For more information, see What is the difference between Connections per Second and Simulated Users?
Tunnel Concurrent Connection	The total number of tunnels created in the Throughput case.
Ramp Up Time	The duration in seconds for which new sessions can be opened, attempting to reach the desired Connections per Second configured. (Range: 0 - 300). NOTE: If FortiTester cannot reach the Connections per Second configured during the specified Ramp Up Time, it will keep the highest CPS it reached during the Ramp Up Time.
Ramp Down Time	The duration in second during which the device ramps down the number of connections it is making. 0 will cause the FortiTester to cease generating sessions. (Range: 0 - 300).
Transactions per Tunnel	Number of transactions in a Tunnel
VPN Gateway Port	Specify the VPN gateway port number.
Enable User Group	Enable to simulate multiple user names. This allows FortiView to populate with more rich user name information, for example. Go to Objects > User Groups > Create New to create a user group object. Click Create New to create multiple users/password pairs to the current User Group Object. In SSL-VPN (CPS/RPS/CC/Throughput) cases, click Enable User Groupand select the User Group created in step 1.
VPN Username	Enter the VPN username.
VPN Password	Enter the VPN password.
Tunnel mode	Select TCP or UDP.
Client Profile
Client Close Mode	Select the connection close method: 3Way_Fin or Reset.
Quiet Shutdown	Enable to apply safe shutdown procedure to SSL connections by sending SSL alert to the peer.
Available SSL Versions	Select SSL versions. TLSv1.3 and other SSL versions are mutually exclusive. This means you can’t select TLSv1.3 at the same time with other SSL versions.
SSL Ciphers	Select one or more SSL ciphers from the list.
Session Resumption	Disabled (turns off session resumption). Resume Session by Ticket: Select this option to simulate a client presenting a ticket to a TLS server, having originated from that server, for the purpose of resuming a TLS session. Resume Session by Session: Select this option to simulate a user attempting to use the same SSL Session ID, initially negotiated with the server. This option applies only to TLS v1 and TLS v1.2. It does not apply to TLS v1.3.
Enable Client Certificate	Enable the client authentication for HTTPS cases.
Piggyback Get Requests	If enabled, this means an acknowledgment is sent on the data frame, not in an individual frame. Otherwise, it sends an ACK frame individually. This feature only works with get/post requests.
Client/Server Network
Network MSS	The maximum segment size. If MSS is bigger than the MTU, IP fragmentation will be triggered conditionally.
Inner Network MSS	The inner TCP MSS.
IP Option DSCP	Provide quality of service (QoS).
Client Limit
Bandwidth	Bandwidth in Mbps. The default is 0, which means the device will send traffic as fast as possible.
Packets per Second	Rate of the packets per second. The default is 0, which means the device will create transactions as fast as possible.
Tunnels per Second	The rate at which DUT establishes tunnels per second.
HttpCps server profiles
HttpCps Load
Simulated Users	Number of users to simulate.
HTTP Request Time Out	An HTTP request timeout occurs when an HTTP request is issued, but no data is responded back from the server within a certain time (in seconds). The timeout usually indicates an overwhelmed server or reverse proxy, or an outage of the back-end transactions processing servers. FortiTester will reset the connection upon timeout.
HttpCps Client
Protocol Level	Select HTTP version. If you select different HTTP versions for client and server, HTTP 1.1 will backward compatibility with HTTP 1.0.
Request Header	The HTTP header of the request packet. Click the Add button to specify more headers. Wild card is supported.
Client Close Mode	Select the connection close method: 3Way_Fin or Reset.
Piggyback Get Requests	If enabled, this means an acknowledgment is sent on the data frame, not in an individual frame. Otherwise, it sends an ACK frame individually. This feature only works with get/post requests.
HttpCps Server Profile
Protocol Level	Select HTTP version. If you select different HTTP versions for client and server, HTTP 1.1 will backward compatibility with HTTP 1.0.
Response Header	The HTTP header of the response packet. Click the Add button to specify more headers.
Case Server Port	The server port where the test case traffic arrives.
HttpCps Server TCP Options
TCP Receive Window	The receive window in which you want the TCP stack to send TCP segments. The receive window informs the peer how many bytes of data the stack is currently able to receive. The supplied value is used in all segments sent by the stack. The valid range is 0 to 65535.
Delayed Acks	Select to cause the TCP stack to implement the Delayed ACK strategy, which attempts to minimize the transmission of zero-payload ACK packets. Acknowledgments will be deferred and should be piggybacked on top of valid data packets. If successfully deferred, these acknowledgments are free, in the sense that they consume no additional bandwidth.
Delayed Ack Timeout	If you select Delayed ACKs, use this timeout value to specify the maximum time the TCP stack waits to defer ACK transmission. If this timer expires, the stack transmits a zero-payload acknowledgment.
Explicit Congestion Notification	Select the Expilcit Congestion Notification(ECN) support level: Disabled: Disables all support for ECN. Support ECN: ECN will be supported if the remote host initiates it first. Use ECN: ECN will be initiated for new connections.
Timestamps Option	Select to add a TCP time stamp to each TCP segment.
Enable Push Flag	Select to set the TCP PSH (push) flag in all TCP packets. This flag causes buffered data to be pushed to the receiving application. If deselected, the PSH flag is not set in any TCP packet.
SACK Option	Select to enable TCP Selective Acknowledgment Options(SACK).
Enable TCP Keepalive	Select to enable TCP Keep-alive Timer.
Keepalive Timeout	If you enable TCP Keepalive, use this timeout value to specify the maximum time to send your peer a keep-alive probe packet
Keepalive Probes	If you enable TCP Keepalive, use this value to specify the maximum probes to detect the broken connection.
Override Internal Timeout Calculation	Select to override the TCP stack calculation of the retransmission timeout value.
Retransmission Timeout	If you select Override Internal Timeout Calculation, use this value for the first transmission of a particular data or control packet; it is doubled for each subsequent retransmission.
Retries	The number of times a timed-out packet is retransmitted before aborting further retransmission. If the client does not receive a response after the configured number of retries have been attempted, the error is logged in the results. CSV file as a TCP timeout when a SYN or FIN is sent, and no SYN/ACK or FIN/ACK from the server is received.
FinACK Timer	This value measures the amount of time that a SimUser waits after it finishes its actions and before it directly breaks all of its TCP connections (that is, the time to wait to receive the LAST_ACK message for a FIN request). A value of 0 disables the timer. Note: Setting this timer can adversely affect TCP performance.
HttpCps Server Network
IP Option DCSP	Provide quality of service (QoS).
HttpCps Server Limit
Bandwidth	Bandwidth in Mbps. The default is 0, which means the device will send traffic as fast as possible.
Packets per Second	Rate of the packets per second. The default is 0, which means the device will create transactions as fast as possible.
HttpCps Action
Method	Three methods are available here: GET, POST, and Custom. If you select Custom, you can click +Add to add at most 32 requests.
Request Page	Select System Pages with Fixed or Random File Name and Content.
Get page	Select the file that the simulated clients access. Optionally, you can select Custom to choose the file template you have created in Cases > Performance Testing > Objects > Files.
Post page	Select the file that simulated servers response. You can edit the post parameters. The file size limit is 10MB.
Response pages	The size of the response. Available only when Method is Custom.
HTTP Pipelining	Available only when Method is Custom.
Generate Random Content	Enable to generate random content in response package. Available only when Method is Custom.
Random Method	Select to use which method to generate random content.
Success criteria	Select criteria to determine if the test succeeds or fails. If the test does not meet the criteria set, the test fails. See Using success criteria.
Randomize File Name and Content	Enable or disable the sending of a random file name and response body based on the user-uploaded file.

Starting an SSL-VPN RPS test

This test establishes a SSL-VPN tunnel connection and completes multiple full of HTTP transaction through it. It creates multiple HTTP transaction per tunnel.

To start an SSL-VPN tunnel RPS test:

Go to Cases > Performance Testing> VPN> SSL-VPN > RPS to display the test case summary page.
Click + Create New to display the Select case options dialog box.
Configure the Inner Traffic and click OK to continue.

Set the server network to Peer Network.

If FortiGate SSLVPN policy has disabled NAT mode, you need set the Internal IP assigned by FortiGate.

If FortiGate SSLVPN policy has enabled NAT mode, you need to set a peer IP.

Set Specifics for Load and Client. See the table below.

Set Inner protocol case Specifics >HTTPCPS.

Simulated Users

Number of simusers in a Tunnel.

SSL-VPN RPS test case options

For details about the common options for SSL-VPN cases, see VPN test case common options.

Settings	Guidelines
Basic Information
VPN Host Group	Specify VPN hosts defined under Objects > Host Group. A Host Group is comprised of Hosts e.g. abc.com = 1.1.1.1 . FortiTester will inject the hosts configured into SNI field (server name indication) within the TLS handshake.
Load
Mode	Simuser: Simulated users. Simuser simulates a user processing through an actions list one at a time. It allows you to determine the maximum number of concurrent users your device, infrastructure, or system can handle. Connections/second: This mode simulates TCP connections, each of them containing up to hundreds of transactions. It's useful to test how many concurrent connections can be handled by your device. NOTE: If you want FortiTester to create connections as fast as possible, set Mode to Simuser. For more information, see What is the difference between Connections per Second and Simulated Users?
Tunnel Concurrent Connection	The total number of tunnels created in the Throughput case.
Ramp Up Time	The duration in seconds for which new sessions can be opened, attempting to reach the desired Connections per Second configured. (Range: 0 - 300). NOTE: If FortiTester cannot reach the Connections per Second configured during the specified Ramp Up Time, it will keep the highest CPS it reached during the Ramp Up Time.
Ramp Down Time	The duration in second during which the device ramps down the number of connections it is making. 0 will cause the FortiTester to cease generating sessions. (Range: 0 - 300).
Transactions per Tunnel	Number of transactions in a Tunnel
VPN Gateway Port	Specify the VPN gateway port number.
Enable User Group	Enable to simulate multiple user names. This allows FortiView to populate with more rich user name information, for example. Go to Objects > User Groups > Create New to create a user group object. Click Create New to create multiple users/password pairs to the current User Group Object. In SSL-VPN (CPS/RPS/CC/Throughput) cases, click Enable User Groupand select the User Group created in step 1.
VPN Username	Enter the VPN username.
VPN Password	Enter the VPN password.
Tunnel mode	Select TCP or UDP.
Client Profile
Client Close Mode	Select the connection close method: 3Way_Fin or Reset.
Quiet Shutdown	Enable to apply safe shutdown procedure to SSL connections by sending SSL alert to the peer.
Available SSL Versions	Select SSL versions. TLSv1.3 and other SSL versions are mutually exclusive. This means you can’t select TLSv1.3 at the same time with other SSL versions.
SSL Ciphers	Select one or more SSL ciphers from the list.
Session Resumption	Disabled (turns off session resumption). Resume Session by Ticket: Select this option to simulate a client presenting a ticket to a TLS server, having originated from that server, for the purpose of resuming a TLS session. Resume Session by Session: Select this option to simulate a user attempting to use the same SSL Session ID, initially negotiated with the server. This option applies only to TLS v1 and TLS v1.2. It does not apply to TLS v1.3.
Enable Client Certificate	Enable the client authentication for HTTPS cases.
Piggyback Get Requests	If enabled, this means an acknowledgment is sent on the data frame, not in an individual frame. Otherwise, it sends an ACK frame individually. This feature only works with get/post requests.
Client/Server Network
Network MSS	The maximum segment size. If MSS is bigger than the MTU, IP fragmentation will be triggered conditionally.
Inner Network MSS	The inner TCP MSS.
IP Option DSCP	Provide quality of service (QoS).
Client Limit
Bandwidth	Bandwidth in Mbps. The default is 0, which means the device will send traffic as fast as possible.
Packets per Second	Rate of the packets per second. The default is 0, which means the device will create transactions as fast as possible.
Tunnels per Second	The rate at which DUT establishes tunnels per second.
HttpCps server profiles
HttpCps Load
Simulated Users	Number of users to simulate.
HTTP Request Time Out	An HTTP request timeout occurs when an HTTP request is issued, but no data is responded back from the server within a certain time (in seconds). The timeout usually indicates an overwhelmed server or reverse proxy, or an outage of the back-end transactions processing servers. FortiTester will reset the connection upon timeout.
HttpCps Client
Protocol Level	Select HTTP version. If you select different HTTP versions for client and server, HTTP 1.1 will backward compatibility with HTTP 1.0.
Request Header	The HTTP header of the request packet. Click the Add button to specify more headers. Wild card is supported.
Client Close Mode	Select the connection close method: 3Way_Fin or Reset.
Piggyback Get Requests	If enabled, this means an acknowledgment is sent on the data frame, not in an individual frame. Otherwise, it sends an ACK frame individually. This feature only works with get/post requests.
HttpCps Server Profile
Protocol Level	Select HTTP version. If you select different HTTP versions for client and server, HTTP 1.1 will backward compatibility with HTTP 1.0.
Response Header	The HTTP header of the response packet. Click the Add button to specify more headers.
Case Server Port	The server port where the test case traffic arrives.
HttpCps Server TCP Options
TCP Receive Window	The receive window in which you want the TCP stack to send TCP segments. The receive window informs the peer how many bytes of data the stack is currently able to receive. The supplied value is used in all segments sent by the stack. The valid range is 0 to 65535.
Delayed Acks	Select to cause the TCP stack to implement the Delayed ACK strategy, which attempts to minimize the transmission of zero-payload ACK packets. Acknowledgments will be deferred and should be piggybacked on top of valid data packets. If successfully deferred, these acknowledgments are free, in the sense that they consume no additional bandwidth.
Delayed Ack Timeout	If you select Delayed ACKs, use this timeout value to specify the maximum time the TCP stack waits to defer ACK transmission. If this timer expires, the stack transmits a zero-payload acknowledgment.
Explicit Congestion Notification	Select the Expilcit Congestion Notification(ECN) support level: Disabled: Disables all support for ECN. Support ECN: ECN will be supported if the remote host initiates it first. Use ECN: ECN will be initiated for new connections.
Timestamps Option	Select to add a TCP time stamp to each TCP segment.
Enable Push Flag	Select to set the TCP PSH (push) flag in all TCP packets. This flag causes buffered data to be pushed to the receiving application. If deselected, the PSH flag is not set in any TCP packet.
SACK Option	Select to enable TCP Selective Acknowledgment Options(SACK).
Enable TCP Keepalive	Select to enable TCP Keep-alive Timer.
Keepalive Timeout	If you enable TCP Keepalive, use this timeout value to specify the maximum time to send your peer a keep-alive probe packet
Keepalive Probes	If you enable TCP Keepalive, use this value to specify the maximum probes to detect the broken connection.
Override Internal Timeout Calculation	Select to override the TCP stack calculation of the retransmission timeout value.
Retransmission Timeout	If you select Override Internal Timeout Calculation, use this value for the first transmission of a particular data or control packet; it is doubled for each subsequent retransmission.
Retries	The number of times a timed-out packet is retransmitted before aborting further retransmission. If the client does not receive a response after the configured number of retries have been attempted, the error is logged in the results. CSV file as a TCP timeout when a SYN or FIN is sent, and no SYN/ACK or FIN/ACK from the server is received.
FinACK Timer	This value measures the amount of time that a SimUser waits after it finishes its actions and before it directly breaks all of its TCP connections (that is, the time to wait to receive the LAST_ACK message for a FIN request). A value of 0 disables the timer. Note: Setting this timer can adversely affect TCP performance.
HttpCps Server Network
IP Option DCSP	Provide quality of service (QoS).
HttpCps Server Limit
Bandwidth	Bandwidth in Mbps. The default is 0, which means the device will send traffic as fast as possible.
Packets per Second	Rate of the packets per second. The default is 0, which means the device will create transactions as fast as possible.
HttpCps Action
Method	Three methods are available here: GET, POST, and Custom. If you select Custom, you can click +Add to add at most 32 requests.
Request Page	Select System Pages with Fixed or Random File Name and Content.
Get page	Select the file that the simulated clients access. Optionally, you can select Custom to choose the file template you have created in Cases > Performance Testing > Objects > Files.
Post page	Select the file that simulated servers response. You can edit the post parameters. The file size limit is 10MB.
Response pages	The size of the response. Available only when Method is Custom.
HTTP Pipelining	Available only when Method is Custom.
Generate Random Content	Enable to generate random content in response package. Available only when Method is Custom.
Random Method	Select to use which method to generate random content.
Success criteria	Select criteria to determine if the test succeeds or fails. If the test does not meet the criteria set, the test fails. See Using success criteria.
Randomize File Name and Content	Enable or disable the sending of a random file name and response body based on the user-uploaded file.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

Administration Guide

Starting an SSL-VPN RPS test