Access control
The System Configuration access control applies to the following menus:
- System > Dashboard
- System > Network > DNS
- System > Network > Settings
- System > Config > SNMP > Communities
- System > Config > SNMP > Users
- System > Config > SNMP > Settings
- System > Config > Firmware
- System > Config > Backup
- System > Config > Revisions
- System > Config > Licenses
- System > Config > Time
- System > Config > SSL
- System > User > Definition
- System > User > Group
- System > Authentication > LDAP
- System > Authentication > RADIUS
- System > Authentication > TACACS
- System > Certificate > Local
- System > Certificate > Remote
- System > Certificate > Authorities
- System > Certificate > CRLs
The Network Configuration access control applies to the follow menus:
- System > Network > Interface > Physical
- System > Network > Interface > VLAN
- System > Network > Interface > Loopback
- Switch > Port > Physical
- Switch > Port > Trunk
- Switch > Interface > Physical
- Switch > Interface > Trunk
- Switch > Interface > Port Security
- Switch > STP > Settings
- Switch > STP > Instances
- Switch > Flap Guard
- Switch > LLDP-MED > Profiles
- Switch > LLDP-MED > Settings
- Switch > POE
- Switch > sFlow
- Switch > Mirror
- Switch > VLAN
- Switch > Virtual Wires
- Switch > Storm Control
- Switch > MAC Entries
- Switch > IP-MAC Binding
- Switch > QoS > 802.1p
- Switch > QoS > IP/DSCP
- Switch > QoS > Egress Policy
- Switch > Monitor > Forwarding Table
- Switch > Monitor > Port Stats
- Switch > Monitor > Spanning Tree
- Switch > Monitor > Modules
- Switch > Monitor > LLDP
- Switch > Monitor > Loop Guard
- Switch > Monitor > Flap Guard
- Switch > Monitor > 802.1x Status
The Admin Users access control applies to the following menus:
- System > Admin > Administrators
- System > Admin > Profiles
- System > Admin > Monitor
- System > Admin > Settings
The Router Configuration access control applies to the following menus:
- Router > Config > OSPF > Settings
- Router > Config > OSPF > Areas
- Router > Config > OSPF > Networks
- Router > Config > OSPF > Interfaces
- Router > Config > RIP > Settings
- Router > Config > RIP > Distances
- Router > Config > RIP > Networks
- Router > Config > RIP > Interfaces
- Router > Config > Static
- Router > Config > Interface
- Router > Config > Link Probes
- Router > Monitor > Routing
- Router > Monitor > Link
The Log & Report access control applies to the follow menus:
- Log > Event Log > Link
- Log > Event Log > POE
- Log > Event Log > Spanning Tree
- Log > Event Log > Switch
- Log > Event Log > Switch Controller
- Log > Event Log > System
- Log > Event Log > Router
- Log > Event Log > User
- Log > Config