Access control
The Management access control applies to following menus:
-
System > Dashboard
-
System > Config > Firmware
-
System > Revisions
-
System > Licenses
The Admin access control applies to the following menus:
-
System > Dashboard
-
System > Admin > Administrators
-
System > Admin > Profiles
-
System > Admin > Monitor
-
System > Authentication > LDAP
-
System > Authentication > RADIUS
-
System > Authentication > TACACS
The Switch Core access control applies to the following menus:
-
System > Dashboard
-
Switch > Physical Ports
-
Switch > Trunks
-
Switch > Interfaces
-
Switch > Port Security
-
Switch > STP > Settings
-
Switch > STP > Instances
-
Switch > Flap Guard
-
Switch > MAC Limit
-
Switch > ACL > Ingress
-
Switch > ACL > Egress
-
Switch > ACL > Prelookup
-
Switch > ACL > Policer
-
Switch > ACL > Service
-
Switch > POE
-
Switch > VLAN
-
Switch > Virtual Wires
-
Switch > MAC Entries
-
Switch > QoS > 802.1p
-
Switch > QoS > IP/DSCP
-
Switch > QoS > Egress Policy
-
Switch > Monitor > ACL Counters
-
Switch > Monitor > Forwarding Table
-
Switch > Monitor > Trunks
-
Switch > Monitor > Port Stats
-
Switch > Monitor > Spanning Tree
-
Switch > Monitor > Modules
-
Switch > Monitor > 802.1x Status
-
Switch > Monitor > IGMP Snooping
The Packet Monitor access control applies to the following menus:
-
System > Dashboard
-
System > Flow Export > Configure
-
System > Flow Export > Monitor
-
System > Packet Capture
-
Switch > sFlow
-
Switch > Mirror
The System Configuration access control applies to the following menus:
-
System > Dashboard
-
System > Network > Settings
-
System > Config > Backup
-
System > Config > Hostname
-
System > Config > Time
-
System > Config > SSL
-
System > Admin > Settings
-
System > User > Definition
-
System > User > Group
-
System > Certificate > Local
-
System > Certificate > Remote
-
System > Certificate > Authorities
-
System > Certificate > CRLs
-
System > Link Monitor
-
System > FortiLAN Cloud
-
System > Locations
-
Switch > DHCP Snooping
-
Router > Config > Link Probes
The Network Configuration access control applies to the follow menus:
-
System > Dashboard
-
System > Network > Interface > Physical
-
System > Network > Interface > VLAN
-
System > Network > Interface > Loopback
-
System > Network > DNS
-
System > DHCP
-
Router > Config > Interface
-
Router > ARP Table
The Log & Report access control applies to the follow menus:
-
System > Dashboard
-
System > Config > SNMP > Communities
-
System > Config > SNMP > Users
-
System > Config > SNMP > Settings
-
Log > Entries
-
Log > Config
The Router Configuration access control applies to the following menus:
-
System > Dashboard
-
Router > Config > OSPF > Settings
-
Router > Config > OSPF > Areas
-
Router > Config > OSPF > Networks
-
Router > Config > OSPF > Interfaces
-
Router > Config > RIP > Settings
-
Router > Config > RIP > Distances
-
Router > Config > RIP > Networks
-
Router > Config > RIP > Interfaces
-
Router > Config > Multicast > Settings
-
Router > Config > Multicast > Interfaces
-
Router > Config > Multicast > Flows
-
Router > Config > Access Lists
-
Router > Config > Static
-
Router > Config > IPv6 Static
-
Router > Config > VRF
-
Router > Monitor > Routing
-
Router > Monitor > IPv6 Routing
-
Router > Monitor > BFD Neighbor
-
Router > Monitor > VRRP
The Switch Monitor Guard access control applies to the following menus:
-
System > Dashboard
-
Switch > LLDP-MED > Profiles
-
Switch > LLDP-MED > Settings
-
Switch > Storm Control
-
Switch > IP-MAC Binding
-
Switch > Monitor > DHCP Snooping > Clients
-
Switch > Monitor > DHCP Snooping > Servers
-
Switch > Monitor > LLDP
-
Switch > Monitor > Loop Guard
-
Switch > Monitor > Flap Guard
-
Switch > Monitor > BPDU Guard
The Utility access control applies to the following menus:
-
GUI CLI
-
System > Dashboard
-
System > Debug Report
-
Router > Diagnostic
The Exec Alias access control applies to the following menus:
-
System > Dashboard