Fortinet black logo

Devices Managed by FortiOS

Configuring ports using the GUI

Copy Link
Copy Doc ID a5cb2173-7e2e-11ec-a0d0-fa163e15d75b:801178
Download PDF

You can use the WiFi & Switch Controller > FortiSwitch Ports page to do the following with FortiSwitch switch ports:

  • Set the native VLAN and add more VLANs
  • Edit the description of the port
  • Enable or disable the port
  • Set the access mode of the port:
    • Static—The port does not use a dynamic port policy or FortiSwitch network access control (NAC) policy.
    • Assign Port Policy—The port uses a dynamic port policy.
    • NAC—The port uses a FortiSwitch NAC policy.
  • Enable or disable PoE for the port
  • Enable or disable DHCP snooping (if supported by the port)
  • Enable or disable whether a port is an edge port
  • Enable or disable STP (if supported by the port)
  • Enable or disable loop guard (if supported by the port)
  • Enable or disable STP BPDU guard (if supported by the port)
  • Enable or disable STP root guard (if supported by the port)

You can use the WiFi & Switch Controller > FortiSwitch Ports page to do the following with FortiSwitch switch ports:

  • Set the native VLAN and add more VLANs
  • Edit the description of the port
  • Enable or disable the port
  • Set the access mode of the port:
    • Static—The port does not use a dynamic port policy or FortiSwitch network access control (NAC) policy.
    • Assign Port Policy—The port uses a dynamic port policy.
    • NAC—The port uses a FortiSwitch NAC policy.
  • Enable or disable PoE for the port
  • Enable or disable DHCP snooping (if supported by the port)
  • Enable or disable whether a port is an edge port
  • Enable or disable STP (if supported by the port)
  • Enable or disable loop guard (if supported by the port)
  • Enable or disable STP BPDU guard (if supported by the port)
  • Enable or disable STP root guard (if supported by the port)