HPE Integrated Lights-Out (iLO)

• Event Types
• Rules
• Reports
• Configuration

Event Types

In ADMIN > Device Support > Event Types, search for "hp-" and look for HPE iLO in the Device Type column to see the event types associated with this device. In FortiSIEM 6.3.0, there are 25 new event types and 500+ generic HP SNMP trap event types.

Rules

No specific rules are available.

Reports

No specific reports are available.

Configuration

For the latest HP iLO documentation, see https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026111en_us#N1050D.

SNMPv1 Traps Configuration

Configure SNMP Settings

To configure SNMP, take the following steps:

1. In the navigation tree, click Management.

2. In the SNMP Settings section, enter the following values:

   • System Location

   • System Contact

   • System Role

   • System Role Detail

   • Read Community 1

   • Read Community 2

   • Read Community 3

3. Click Apply.
   Note: More information is available here.
   

Add SNMP Alert Destinations

1. In the navigation tree, click Management.

2. In the SNMP Alert Destinations section, click New, and enter the following values.

   • SNMP Alert Destination

   • Trap Community

   • SNMP Protocol

   • SNMPv3 User

3. Click Add.
   Note: More information is available here.

Configure SNMP Alerts

1. In the navigation tree, click Management.

2. In the SNMP Alerts section, configure Trap Source Identifier by selecting iLO Hostname or OS Hostname.

3. Configure the following values:

   • iLO SNMP Alerts

   • SNMPv1

   • Cold Start Trap Broadcast

   • Periodic HSA Trap Configuration

   Click Apply to save.
   Note: More information is available here.