APC Netbotz Environmental Monitor
What is Monitored and Collected
|
Protocol |
Information Discovered |
Metrics collected |
Used for |
|---|---|---|---|
| SNMP (V1, V2c) | Host name, Hardware model, Network interfaces |
Temperature: Sensor Id, Sensor label, Enclosure Id, Temperature Relative Humidity: Sensor Id, Sensor label, Enclosure Id, Relative Humidity Air Flow: Sensor Id, Sensor label, Enclosure Id, Air Flow Dew Point Temperature: Sensor Id, Sensor label, Enclosure Id, Dew Point Temperature Current: Sensor Id, Sensor label, Enclosure Id, Current Audio Sensor Reading: Sensor Id, Sensor label, Enclosure Id, Audio Sensor Reading Dry Contact Sensor Reading: Sensor Id, Sensor label, Enclosure Id, Dry Contact Sensor Reading |
Availability and Performance Monitoring |
|
|
|
Door Switch Sensor Reading: Sensor Id, Sensor label, Enclosure Id, Door Switch Sensor Reading (Open/Close) Camera Motion Sensor Reading: Sensor Id, Sensor label, Enclosure Id, Camera Motion Sensor Reading (Motion/No Motion) Hadware Status (for NBRK0200): Contact Status, Output Relay Status, Outlet Status, Alarm Device Status, Memory Sensor Status, Memory Output Status, Memory Outlet Status, memory Beacon Status EMS Status (for NBRK0200): EMS Hardware Status, Connection State Hardware Probe (for NBRK0200): Sensor Id, Temperature, Relative Humidity, Connection State Code Module Sensor (for NBRK0200): Sensor Name, Sensor location, Temperature, Relative Humidity, Connection State Code |
|
|
SNMP Trap (V1, V2c) |
SNMP Trap |
See Event Types for more information about viewing the SNMP traps collected by FortiSIEM for this device. |
Availability and Performance Monitoring |
Event Types
In ADMIN > Device Support > Event Types, search for "NetBotz" to see the event types associated with this application or device.
Event types for NetBotz NBRK0200
-
PH_DEV_MON_HW_STATUS
[PH_DEV_MON_HW_STATUS]:[eventSeverity]=PHL_INFO,[fileName]=deviceNetBotz.cpp,[lineNumber]=1642,[hostName]=Unknown,[hostIpAddr]=10.62.97.61,[hwStatusCode]=2,[hwProbeStatus]=2,[hwInputContactStatus]=2,[hwOutputRelayStatus]=0,[hwOutletStatus]=2,[hwAlarmDeviceStatus]=0,[hwMemSensorStatus]=0,[hwMemOutputStatus]=2,[hwMemOutletStatus]=2,[hwMemBeaconStatus]=2,[phLogDetail]=
-
PH_DEV_MON_HW_EMS_STATUS
[PH_DEV_MON_HW_EMS_STATUS]:[eventSeverity]=PHL_INFO,[fileName]=deviceNetBotz.cpp,[lineNumber]=1871,[hostName]=Unknown,[hostIpAddr]=10.62.97.61,[reptDevName]=Unknown,[emsHwStatus]=0,[phyMachConnectionStateCode]=2,[hwLogStatus]=1,[phLogDetail]=
-
PH_DEV_MON_HW_PROBE
[PH_DEV_MON_HW_PROBE]:[eventSeverity]=PHL_INFO,[fileName]=deviceNetBotz.cpp,[lineNumber]=2100,[hostName]=Unknown,[hostIpAddr]=10.62.97.61,[envSensorLabel]=Sensor MM:4,[envTempDegF]=74,[envTempHighThreshDegF]=138,[envHumidityRel]=51,[envHumidityRelHighThresh]=90,[envHumidityRelLowThresh]=10,[serialNumber]=L3,[phyMachConnectionStateCode]=3,[maxTempThresh]=140,[minTempThresh]=32,[maxHumidityThresh]=99,[minHumidityThresh]=0,[phLogDetail]=
-
PH_DEV_MON_HW_MODULE_SENSOR
[PH_DEV_MON_HW_MODULE_SENSOR]:[eventSeverity]=PHL_INFO,[fileName]=deviceNetBotz.cpp,[lineNumber]=2567,[hostName]=Unknown,[hostIpAddr]=10.62.97.61,[moduleNumber]=0,[envSensorId]=1,[envSensorLabel]=Sensor MM:1,[envSensorLoc]=Orland Park Server,[envTempDegF]=74,[envHumidityRel]=50,[phyMachConnectionStateCode]=1,[hwAlarmDevicetatus]=1,[phLogDetail]=
Rules
In RESOURCES > Rules, search for "NetBotz" in the main content panel Search... field to see the rules associated with this application or device.
Reports
In RESOURCES > Reports, search for "NetBotz" in the main content panel Search... field to see the reports associated with this application or device.
Configuration
SNMP
FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.
SNMP Trap
FortiSIEM processes events from this device via SNMP traps sent by the device. Configure the device to send SNMP traps to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.
Setting Access Credentials
Set these Access Method Definition values to allow FortiSIEM to communicate with your device.
| Setting | Value |
|---|---|
| Name | <set name> |
| Device Type | APC NetBotz |
| Access Protocol | See Access Credentials |
| Port | See Access Credentials |
| Password config | See Password Configuration |