Riverbed SteelHead WAN Accelerator

• What is Discovered and Monitored
• Event Types
• Rules
• Reports
• Configuration
• Settings for Access Credentials

What is Discovered and Monitored

Protocol	Information Discovered	Metrics collected	Used for
SNMP	Host name, Software version, Hardware model, Network interfaces	Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Disk space utilization, Process cpu/memory utilization	Availability and Performance Monitoring
SNMP		Hardware status	Availability and Performance Monitoring
SNMP		Bandwidth metrics: Inbound Optimized Bytes - LAN side, WAN side, Outbound optimized bytes - LAN side and WAN side Connection metrics: Optimized connections, Passthrough connections, Half-open optimized connections, Half-closed Optimized connections, Established optimized connections, Active optimized connections Top Usage metrics: Top source (Source IP, Total Bytes), Top destination (Destination IP, Total Bytes), Top Application (TCP/UDP port, Total Bytes), Top Talker (Source IP, Source Port, Destination IP, Destination Port, Total Bytes) Peer status: For every peer: State, Connection failures, Request timeouts, Max latency	Availability and Performance Monitoring
SNMP Trap		All traps: software errors, hardware errors, admin login, performance issues - cpu, memory, peer latency issues. About 115 traps defined in ADMIN > Device Support > Event. The mapped event types start with "Riverbed-".	Availability, Security and Compliance

Event Types

In ADMIN > Device Support > Event Types, search for "steelhead" to see the event types associated with this device.

Rules

In RESOURCES > Rules, search for "steelhead" in the main content panel Search... field to see the rules associated with this device.

Reports

There are no predefined reports for this device.

Configuration

• SNMP

• SNMP Trap

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

SNMP Trap

FortiSIEM processes events from this device via SNMP traps sent by the device. Configure the device to send send SNMP traps to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting	Value
Name	<set name>
Device Type	Riverbed Steelhead
Access Protocol	See Access Credentials
Port	See Access Credentials
Password config	See Password Configuration