- What is Discovered and Monitored
- Event Types
- Settings for Access Credentials
What is Discovered and Monitored
SNMP (V1, V2c)
Host name, Hardware model, Network interfaces
HVAC metrics: Temperature: current value, upper threshold, lower threshold, Relative Humidity: current value, upper threshold, lower threshold, System state, Cooling state, Heating state, Humidifying state, Dehumidifying state, Economic cycle, Fan state, Heating capacity, Cooling capacity
Availability and Performance Monitoring
FortiSIEM uses SNMP to discover and collector metrics from Generic UPS devices. This requires the presence of UPS-MIB on the UPS device.
See the Liebert HVAC documentation to enable FortiSIEM to poll the device via SNMP.
In ADMIN > Device Support > Event Types, search for "Liebert HVAC" to see the event types associated with this device.
There are no predefined rules for this device.
In RESOURCES > Reports , search for "Liebert HVAC" in the main content panel Search... field to see the reports associated with this device.
Note: UPS-MIB Required
Your device must have a UPS-MIB database to communicate with FortiSIEM.
FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.
Settings for Access Credentials
Use these Access Method Definition settings to allow FortiSIEM to access your device.
|Device Type||Liebert HVAC|
|Access Protocol||See Access Credentials|
|Port||See Access Credentials|
|Password config||See Access Credentials|