Creating an SSID
You can configure your wireless network by defining one or more SSIDs to which your users can connect. FortiSASE uses IP address management (IPAM) to automatically configure IP/Netmask settings for an SSID.
General SSID settings
Field |
Description |
---|---|
Name |
Enter a name for the SSID interface. |
Traffic Mode |
Tunnel — (Tunnel to Wireless Controller) Data for WLAN passes through WiFi Controller. This is the default. Currently this is the only mode supported. |
Status |
SSID interface status. |
WiFi Settings
Field |
Description |
---|---|
SSID |
Enter the SSID. |
Client Limit |
Limit the number of clients allowed in the SSID. |
Broadcast SSID |
Disable broadcast of SSID. By default, the SSID is not broadcast.[FM1] |
WiFi Security
Field |
Description |
---|---|
Mode |
Select the security mode for the wireless interface. Wireless users must use the same security mode to be able to connect to this wireless interface.
|
Pre-shared Key |
Available only when Mode is WPA2 Personal. Preshared key must be 8 to 63 characters long. |
Authentication |
Available only when Mode is WPA2 Enterprise or WPA3 Enterprise Only. Select one of the following:
|