set
Set configuration parameters.
Syntax
set <admin-port>
set <api-port>
set <date>
set <default-gw>
set <port3-speed> <auto| <speed {full|half}]
set <port-mtu> <portx> <1200-9000>
set <portX-ip> <ip/netmask>
set <time>
|
Attribute |
Value |
Description |
Example |
|---|---|---|---|
|
admin-port |
portx |
Enable a new administrative port other than port1. This cannot be set to port3 or sniffer ports. |
admin-port port2 |
|
api-port |
portx |
Set ports for API connection. |
api-port port2 |
|
date |
date |
Set system date, in the format of YYYY-MM-DD. |
date 2023-10-31 |
|
default-gw |
ip |
Set the default gateway address. |
default-gw 1.2.3.4 |
|
port3-speed |
auto speed {full|half} |
Set port3 speed and duplex settings. The option port3-speed is not supported on FSA_VM. |
port3-speed 1000 full, port3-speed auto |
|
port-mtu |
<portx> <1200-9000> |
Set a port's MTU value. |
port-mtu port1 1200 |
|
portX-ip |
<ip/netmask> |
Set the portX IP address in IP/netmask format. This can also set the address on aggregate ports. |
port1-ip 1.2.3.4/24 port2-ip 1.2.3.4/24 |
|
time |
<time> |
Set system time, in the format of HH:MM:SS. |
time 12:00:00 |