Upload system configuration backup to remote server.

Clean up the internal database and job information. This command erases all stored data and reboots the device.

This command only works on devices that are in standalone mode.

List the status of units joining the Global Threat Information Network.

Reset the FortiSandbox configuration to factory default settings. Job data is kept.

For installed VM images, their clone numbers and Scan Profile settings are set back to default.

Set confirm ID for Microsoft Windows or Office activation.

Configure new client device authorization .

Enable/disable OFTPD supporting FortiGate-LENC devices.

Reset the FortiSandbox configuration to factory default settings. All data is deleted.

For installed VM images, only Default VMs are kept and their clone number and Scan Profile settings are set back to default.

Check the file system on the hard disk and repair it if it's not clean. System reboots immediately.

Upgrade or re-install the FortiSandbox firmware via Secure Copy (SCP) or File Transfer Protocol (FTP) server.

Enable/disable IP tables.

Enable/disable the log file drop event.

Delete all system logs.

Enable/disable conserve mode of OFTPD.

For details, see oftpd-con-mode.

Use this command to display power supply status.

Reboot the FortiSandbox. All sessions will be terminated. The unit goes offline and there is a delay while it restarts.

Set the timeout for remote authentication.

Administrators with the Super Admin profile can use this command to rename other administrators.

Reset the tracer/rating engine back to firmware default.

Reset the scan flow settings to firmware default values.

Reset the GUI widgets.

Execute this command to force the firmware to recognize changes to the virtual hard disk size on the hypervisor. The unit will be reboot after entering y for the confirmation question.This command is only available for FSAVM00 models.

Restore system configuration from remote server.

For details, see restore-sysconf.

Display FortiSandbox FortiGuard component versions including the Tracer Engine, Rating Engine, Traffic Sniffer, Botnet Signature Database, IPS Signature Database, and Android engine versions.

Set your own passphrase that openSSL uses to encrypt or decrypt a configuration backup file.

Enable/disable the maintainer account.

Set tcp timestamp reponse.

Set the allowed TLS version for HTTPS service.

Shutdown the FortiSandbox.

Display the FortiSandbox firmware version, serial number, system time, disk usage, disk inode usage, image status check, Microsoft Windows VM status, VM network access configuration, and RAID information.

Create/Delete an Administrator.

Configure data upload settings to community cloud.