Verifying Web Filtering Queries on FortiGate and FortiSandbox

To Verify Web Filtering Queries on FortiGate and FortiSandbox:

1. Log in to FortiGate and enable web filter service and choose any location for the location.

   #config system fortiguard 
   (fortiguard) # set update-server-location any 
   (fortiguard) # set webfilter-force-off disable 
   (fortiguard) # end 
   

2. Update the server location on FortiGate.
   1. Go to System > FortiGuard.
   2. Set the following configurations.

      Update server location		Lowest latency locations.
      Filtering
      	Web Filter Cache	Enable
      	Anti-Spam Cache	Enable
      	FortiGuard Filtering Protocol	UDP
      	FortiGuard Filtering Port	8888
      	Filtering Service Availability	Click Check Again. Verify Web Filtering and Anti-Spam are Up.
      Override FortiGuard Servers	Click Create New to add the Server Address and select the Server Type.

      

   3. Click Apply.
3. Log in to FortiSandbox.
4. Open the CLI console and issue the command test-network. The Web filtering service should turn ON in both the CLI output and the Dashboard.