config firewall central-snat-map
Configure central SNAT policies.
config firewall central-snat-map Description: Configure central SNAT policies. edit <policyid> set status [enable|disable] set action [bypass|masquerade|...] set ipv6 [enable|disable] set srcintf {string} set dstintf {string} set src-addr <name1>, <name2>, ... set src-addr6 <name1>, <name2>, ... set dst-addr <name1>, <name2>, ... set dst-addr6 <name1>, <name2>, ... set nat-ippool <name1>, <name2>, ... set nat-ippool6 <name1>, <name2>, ... next end
config firewall central-snat-map
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
policyid |
Policy ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
status |
Enable/disable the active status of this policy. |
option |
- |
enable |
||||||||
|
|
|||||||||||
action |
central SNAT action. |
option |
- |
masquerade |
||||||||
|
|
|||||||||||
ipv6 |
Enable/disable IPv6. |
option |
- |
disable |
||||||||
|
|
|||||||||||
srcintf |
Source interface name from available interfaces. |
string |
Maximum length: 35 |
|
||||||||
dstintf |
Destination interface name from available interfaces. |
string |
Maximum length: 35 |
|
||||||||
src-addr |
IPv4 Original address. Address name. |
string |
Maximum length: 79 |
|
||||||||
src-addr6 |
IPv6 Original address. Address name. |
string |
Maximum length: 79 |
|
||||||||
dst-addr |
IPv4 Destination address. Address name. |
string |
Maximum length: 79 |
|
||||||||
dst-addr6 |
IPv6 Destination address. Address name. |
string |
Maximum length: 79 |
|
||||||||
nat-ippool |
Name of the IP pools to be used to translate addresses from available IP Pools. IP pool name. |
string |
Maximum length: 79 |
|
||||||||
nat-ippool6 |
IPv6 pools to be used for source NAT. IP pool name. |
string |
Maximum length: 79 |
|