config user radius

Configure RADIUS server entries.

config user radius
    Description: Configure RADIUS server entries.
    edit <name>
        set server {string}
        set secret {password}
        set secondary-server {string}
        set secondary-secret {password}
        set tertiary-server {string}
        set tertiary-secret {password}
        set timeout {integer}
        set all-usergroup [disable|enable]
        set use-management-vdom [enable|disable]
        set nas-ip {ipv4-address}
        set nas-id-type [legacy|custom|...]
        set nas-id {string}
        set acct-interim-interval {integer}
        set radius-coa [enable|disable]
        set radius-port {integer}
        set h3c-compatibility [enable|disable]
        set auth-type [auto|ms_chap_v2|...]
        set source-ip {string}
        set username-case-sensitive [enable|disable]
        set group-override-attr-type [filter-Id|class]
        set class <name1>, <name2>, ...
        set password-renewal [enable|disable]
        set password-encoding [auto|ISO-8859-1]
        set mac-username-delimiter [hyphen|single-hyphen|...]
        set mac-password-delimiter [hyphen|single-hyphen|...]
        set mac-case [uppercase|lowercase]
        set acct-all-servers [enable|disable]
        set switch-controller-acct-fast-framedip-detect {integer}
        set interface-select-method [auto|sdwan|...]
        set interface {string}
        set switch-controller-service-type {option1}, {option2}, ...
        set rsso [enable|disable]
        set rsso-radius-server-port {integer}
        set rsso-radius-response [enable|disable]
        set rsso-validate-request-secret [enable|disable]
        set rsso-secret {password}
        set rsso-endpoint-attribute [User-Name|NAS-IP-Address|...]
        set rsso-endpoint-block-attribute [User-Name|NAS-IP-Address|...]
        set sso-attribute [User-Name|NAS-IP-Address|...]
        set sso-attribute-key {string}
        set sso-attribute-value-override [enable|disable]
        set rsso-context-timeout {integer}
        set rsso-log-period {integer}
        set rsso-log-flags {option1}, {option2}, ...
        set rsso-flush-ip-session [enable|disable]
        set rsso-ep-one-ip-only [enable|disable]
        set delimiter [plus|comma]
        config accounting-server
            Description: Additional accounting servers.
            edit <id>
                set status [enable|disable]
                set server {string}
                set secret {password}
                set port {integer}
                set source-ip {string}
                set interface-select-method [auto|sdwan|...]
                set interface {string}
            next
        end
    next
end

config user radius

Parameter

Description

Type

Size

Default

name

RADIUS server entry name.

string

Maximum length: 35

server

Primary RADIUS server CN domain name or IP address.

string

Maximum length: 63

secret

Pre-shared secret key used to access the primary RADIUS server.

password

Not Specified

secondary-server

Secondary RADIUS CN domain name or IP address.

string

Maximum length: 63

secondary-secret

Secret key to access the secondary server.

password

Not Specified

tertiary-server

Tertiary RADIUS CN domain name or IP address.

string

Maximum length: 63

tertiary-secret

Secret key to access the tertiary server.

password

Not Specified

timeout

Time in seconds between re-sending authentication requests.

integer

Minimum value: 1 Maximum value: 300

all-usergroup

Enable/disable automatically including this RADIUS server in all user groups.

option

disable

Option	Description
disable	Do not automatically include this server in a user group.
enable	Include this RADIUS server in every user group.

use-management-vdom

Enable/disable using management VDOM to send requests.

option

disable

Option	Description
enable	Send requests using the management VDOM.
disable	Send requests using the current VDOM.

nas-ip

IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes.

ipv4-address

Not Specified

0.0.0.0

nas-id-type

NAS identifier type configuration.

option

legacy

Option	Description
legacy	NAS-ID value is the value previously used by each daemon.
custom	NAS-ID value is customized.
hostname	NAS-ID value is hostname or HA group name if applicable.

nas-id

Custom NAS identifier.

string

Maximum length: 255

acct-interim-interval

Time in seconds between each accounting interim update message.

integer

Minimum value: 60 Maximum value: 86400

radius-coa

Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated.

option

disable

Option	Description
enable	Enable RADIUS CoA.
disable	Disable RADIUS CoA.

radius-port

RADIUS service port number.

integer

Minimum value: 0 Maximum value: 65535

h3c-compatibility

Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication.

option

disable

Option	Description
enable	Enable H3C compatibility.
disable	Disable H3C compatibility.

auth-type

Authentication methods/protocols permitted for this RADIUS server.

option

auto

Option	Description
auto	Use PAP, MSCHAP_v2, and CHAP (in that order).
ms_chap_v2	Microsoft Challenge Handshake Authentication Protocol version 2.
ms_chap	Microsoft Challenge Handshake Authentication Protocol.
chap	Challenge Handshake Authentication Protocol.
pap	Password Authentication Protocol.

source-ip

Source IP address for communications to the RADIUS server.

string

Maximum length: 63

username-case-sensitive

Enable/disable case sensitive user names.

option

disable

Option	Description
enable	Enable username case-sensitive.
disable	Disable username case-sensitive.

group-override-attr-type

RADIUS attribute type to override user group information.

option

Option	Description
filter-Id	Filter-Id
class	Class

class <name>

Class attribute name(s).

Class name.

string

Maximum length: 79

password-renewal

Enable/disable password renewal.

option

enable

Option	Description
enable	Enable password renewal.
disable	Disable password renewal.

password-encoding

Password encoding.

option

auto

Option	Description
auto	Use original password encoding.
ISO-8859-1	Use ISO-8859-1 password encoding.

mac-username-delimiter

MAC authentication username delimiter.

option

hyphen

Option	Description
hyphen	Use hyphen as delimiter for MAC authentication username.
single-hyphen	Use single hyphen as delimiter for MAC authentication username.
colon	Use colon as delimiter for MAC authentication username.
none	No delimiter for MAC authentication username.

mac-password-delimiter

MAC authentication password delimiter.

option

hyphen

Option	Description
hyphen	Use hyphen as delimiter for MAC authentication password.
single-hyphen	Use single hyphen as delimiter for MAC authentication password.
colon	Use colon as delimiter for MAC authentication password.
none	No delimiter for MAC authentication password.

mac-case

MAC authentication case.

option

lowercase

Option	Description
uppercase	Use uppercase MAC.
lowercase	Use lowercase MAC.

acct-all-servers

Enable/disable sending of accounting messages to all configured servers.

option

disable

Option	Description
enable	Send accounting messages to all configured servers.
disable	Send accounting message only to servers that are confirmed to be reachable.

switch-controller-acct-fast-framedip-detect

Switch controller accounting message Framed-IP detection from DHCP snooping.

integer

Minimum value: 2 Maximum value: 600

interface-select-method

Specify how to select outgoing interface to reach server.

option

auto

Option	Description
auto	Set outgoing interface automatically.
sdwan	Set outgoing interface by SD-WAN or policy routing rules.
specify	Set outgoing interface manually.

interface

Specify outgoing interface to reach server.

string

Maximum length: 15

switch-controller-service-type

RADIUS service type.

option

Option	Description
login	User should be connected to a host.
framed	User use Framed Protocol.
callback-login	User disconnected and called back.
callback-framed	User disconnected and called back, then a Framed Protocol.
outbound	User granted access to outgoing devices.
administrative	User granted access to the administrative unsigned interface.
nas-prompt	User provided a command prompt on the NAS.
authenticate-only	Authentication requested, and no auth info needs to be returned.
callback-nas-prompt	User disconnected and called back, then provided a command prompt.
call-check	Used by the NAS in an Access-Request packet, Access-Accept to answer the call.
callback-administrative	User disconnected and called back, granted access to the admin unsigned interface.

rsso

Enable/disable RADIUS based single sign on feature.

option

disable

Option	Description
enable	Enable RADIUS based single sign on feature.
disable	Disable RADIUS based single sign on feature.

rsso-radius-server-port

UDP port to listen on for RADIUS Start and Stop records.

integer

Minimum value: 0 Maximum value: 65535

1813

rsso-radius-response

Enable/disable sending RADIUS response packets after receiving Start and Stop records.

option

disable

Option	Description
enable	Enable sending RADIUS response packets.
disable	Disable sending RADIUS response packets.

rsso-validate-request-secret

Enable/disable validating the RADIUS request shared secret in the Start or End record.

option

disable

Option	Description
enable	Enable validating RADIUS request shared secret.
disable	Disable validating RADIUS request shared secret.

rsso-secret

RADIUS secret used by the RADIUS accounting server.

password

Not Specified

rsso-endpoint-attribute

RADIUS attributes used to extract the user end point identifier from the RADIUS Start record.

option

Calling-Station-Id

Option	Description
User-Name	Use this attribute.
NAS-IP-Address	Use this attribute.
Framed-IP-Address	Use this attribute.
Framed-IP-Netmask	Use this attribute.
Filter-Id	Use this attribute.
Login-IP-Host	Use this attribute.
Reply-Message	Use this attribute.
Callback-Number	Use this attribute.
Callback-Id	Use this attribute.
Framed-Route	Use this attribute.
Framed-IPX-Network	Use this attribute.
Class	Use this attribute.
Called-Station-Id	Use this attribute.
Calling-Station-Id	Use this attribute.
NAS-Identifier	Use this attribute.
Proxy-State	Use this attribute.
Login-LAT-Service	Use this attribute.
Login-LAT-Node	Use this attribute.
Login-LAT-Group	Use this attribute.
Framed-AppleTalk-Zone	Use this attribute.
Acct-Session-Id	Use this attribute.
Acct-Multi-Session-Id	Use this attribute.

rsso-endpoint-block-attribute

RADIUS attributes used to block a user.

option

Option	Description
User-Name	Use this attribute.
NAS-IP-Address	Use this attribute.
Framed-IP-Address	Use this attribute.
Framed-IP-Netmask	Use this attribute.
Filter-Id	Use this attribute.
Login-IP-Host	Use this attribute.
Reply-Message	Use this attribute.
Callback-Number	Use this attribute.
Callback-Id	Use this attribute.
Framed-Route	Use this attribute.
Framed-IPX-Network	Use this attribute.
Class	Use this attribute.
Called-Station-Id	Use this attribute.
Calling-Station-Id	Use this attribute.
NAS-Identifier	Use this attribute.
Proxy-State	Use this attribute.
Login-LAT-Service	Use this attribute.
Login-LAT-Node	Use this attribute.
Login-LAT-Group	Use this attribute.
Framed-AppleTalk-Zone	Use this attribute.
Acct-Session-Id	Use this attribute.
Acct-Multi-Session-Id	Use this attribute.

sso-attribute

RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record.

option

Class

Option	Description
User-Name	Use this attribute.
NAS-IP-Address	Use this attribute.
Framed-IP-Address	Use this attribute.
Framed-IP-Netmask	Use this attribute.
Filter-Id	Use this attribute.
Login-IP-Host	Use this attribute.
Reply-Message	Use this attribute.
Callback-Number	Use this attribute.
Callback-Id	Use this attribute.
Framed-Route	Use this attribute.
Framed-IPX-Network	Use this attribute.
Class	Use this attribute.
Called-Station-Id	Use this attribute.
Calling-Station-Id	Use this attribute.
NAS-Identifier	Use this attribute.
Proxy-State	Use this attribute.
Login-LAT-Service	Use this attribute.
Login-LAT-Node	Use this attribute.
Login-LAT-Group	Use this attribute.
Framed-AppleTalk-Zone	Use this attribute.
Acct-Session-Id	Use this attribute.
Acct-Multi-Session-Id	Use this attribute.

sso-attribute-key

Key prefix for SSO group value in the SSO attribute.

string

Maximum length: 35

sso-attribute-value-override

Enable/disable override old attribute value with new value for the same endpoint.

option

enable

Option	Description
enable	Enable override old attribute value with new value for the same endpoint.
disable	Disable override old attribute value with new value for the same endpoint.

rsso-context-timeout

Time in seconds before the logged out user is removed from the "user context list" of logged on users.

integer

Minimum value: 0 Maximum value: 4294967295

28800

rsso-log-period

Time interval in seconds that group event log messages will be generated for dynamic profile events.

integer

Minimum value: 0 Maximum value: 4294967295

rsso-log-flags

Events to log.

option

protocol-error profile-missing accounting-stop-missed accounting-event endpoint-block radiusd-other

Option	Description
protocol-error	Enable this log type.
profile-missing	Enable this log type.
accounting-stop-missed	Enable this log type.
accounting-event	Enable this log type.
endpoint-block	Enable this log type.
radiusd-other	Enable this log type.
none	Disable all logging.

rsso-flush-ip-session

Enable/disable flushing user IP sessions on RADIUS accounting Stop messages.

option

disable

Option	Description
enable	Enable flush user IP sessions on RADIUS accounting stop.
disable	Disable flush user IP sessions on RADIUS accounting stop.

rsso-ep-one-ip-only

Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages.

option

disable

Option	Description
enable	Enable replacement of old IP address with new IP address for the same endpoint on RADIUS accounting start.
disable	Disable replacement of old IP address with new IP address for the same endpoint on RADIUS accounting start.

delimiter

Configure delimiter to be used for separating profile group names in the SSO attribute.

option

plus

Option	Description
plus	Plus character "+".
comma	Comma character ",".

config accounting-server

Parameter

Description

Type

Size

Default

ID.

integer

Minimum value: 0 Maximum value: 4294967295

status

Status.

option

disable

Option	Description
enable	Log to remote syslog server.
disable	Do not log to remote syslog server.

server

Server CN domain name or IP address.

string

Maximum length: 63

secret

Secret key.

password

Not Specified

port

RADIUS accounting port number.

integer

Minimum value: 0 Maximum value: 65535

source-ip

Source IP address for communications to the RADIUS server.

string

Maximum length: 63

interface-select-method

Specify how to select outgoing interface to reach server.

option

auto

Option	Description
auto	Set outgoing interface automatically.
sdwan	Set outgoing interface by SD-WAN or policy routing rules.
specify	Set outgoing interface manually.

interface

Specify outgoing interface to reach server.

string

Maximum length: 15

config user radius

Configure RADIUS server entries.

config user radius
    Description: Configure RADIUS server entries.
    edit <name>
        set server {string}
        set secret {password}
        set secondary-server {string}
        set secondary-secret {password}
        set tertiary-server {string}
        set tertiary-secret {password}
        set timeout {integer}
        set all-usergroup [disable|enable]
        set use-management-vdom [enable|disable]
        set nas-ip {ipv4-address}
        set nas-id-type [legacy|custom|...]
        set nas-id {string}
        set acct-interim-interval {integer}
        set radius-coa [enable|disable]
        set radius-port {integer}
        set h3c-compatibility [enable|disable]
        set auth-type [auto|ms_chap_v2|...]
        set source-ip {string}
        set username-case-sensitive [enable|disable]
        set group-override-attr-type [filter-Id|class]
        set class <name1>, <name2>, ...
        set password-renewal [enable|disable]
        set password-encoding [auto|ISO-8859-1]
        set mac-username-delimiter [hyphen|single-hyphen|...]
        set mac-password-delimiter [hyphen|single-hyphen|...]
        set mac-case [uppercase|lowercase]
        set acct-all-servers [enable|disable]
        set switch-controller-acct-fast-framedip-detect {integer}
        set interface-select-method [auto|sdwan|...]
        set interface {string}
        set switch-controller-service-type {option1}, {option2}, ...
        set rsso [enable|disable]
        set rsso-radius-server-port {integer}
        set rsso-radius-response [enable|disable]
        set rsso-validate-request-secret [enable|disable]
        set rsso-secret {password}
        set rsso-endpoint-attribute [User-Name|NAS-IP-Address|...]
        set rsso-endpoint-block-attribute [User-Name|NAS-IP-Address|...]
        set sso-attribute [User-Name|NAS-IP-Address|...]
        set sso-attribute-key {string}
        set sso-attribute-value-override [enable|disable]
        set rsso-context-timeout {integer}
        set rsso-log-period {integer}
        set rsso-log-flags {option1}, {option2}, ...
        set rsso-flush-ip-session [enable|disable]
        set rsso-ep-one-ip-only [enable|disable]
        set delimiter [plus|comma]
        config accounting-server
            Description: Additional accounting servers.
            edit <id>
                set status [enable|disable]
                set server {string}
                set secret {password}
                set port {integer}
                set source-ip {string}
                set interface-select-method [auto|sdwan|...]
                set interface {string}
            next
        end
    next
end

config user radius

Parameter

Description

Type

Size

Default

name

RADIUS server entry name.

string

Maximum length: 35

server

Primary RADIUS server CN domain name or IP address.

string

Maximum length: 63

secret

Pre-shared secret key used to access the primary RADIUS server.

password

Not Specified

secondary-server

Secondary RADIUS CN domain name or IP address.

string

Maximum length: 63

secondary-secret

Secret key to access the secondary server.

password

Not Specified

tertiary-server

Tertiary RADIUS CN domain name or IP address.

string

Maximum length: 63

tertiary-secret

Secret key to access the tertiary server.

password

Not Specified

timeout

Time in seconds between re-sending authentication requests.

integer

Minimum value: 1 Maximum value: 300

all-usergroup

Enable/disable automatically including this RADIUS server in all user groups.

option

disable

Option	Description
disable	Do not automatically include this server in a user group.
enable	Include this RADIUS server in every user group.

use-management-vdom

Enable/disable using management VDOM to send requests.

option

disable

Option	Description
enable	Send requests using the management VDOM.
disable	Send requests using the current VDOM.

nas-ip

IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes.

ipv4-address

Not Specified

0.0.0.0

nas-id-type

NAS identifier type configuration.

option

legacy

Option	Description
legacy	NAS-ID value is the value previously used by each daemon.
custom	NAS-ID value is customized.
hostname	NAS-ID value is hostname or HA group name if applicable.

nas-id

Custom NAS identifier.

string

Maximum length: 255

acct-interim-interval

Time in seconds between each accounting interim update message.

integer

Minimum value: 60 Maximum value: 86400

radius-coa

Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated.

option

disable

Option	Description
enable	Enable RADIUS CoA.
disable	Disable RADIUS CoA.

radius-port

RADIUS service port number.

integer

Minimum value: 0 Maximum value: 65535

h3c-compatibility

Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication.

option

disable

Option	Description
enable	Enable H3C compatibility.
disable	Disable H3C compatibility.

auth-type

Authentication methods/protocols permitted for this RADIUS server.

option

auto

Option	Description
auto	Use PAP, MSCHAP_v2, and CHAP (in that order).
ms_chap_v2	Microsoft Challenge Handshake Authentication Protocol version 2.
ms_chap	Microsoft Challenge Handshake Authentication Protocol.
chap	Challenge Handshake Authentication Protocol.
pap	Password Authentication Protocol.

source-ip

Source IP address for communications to the RADIUS server.

string

Maximum length: 63

username-case-sensitive

Enable/disable case sensitive user names.

option

disable

Option	Description
enable	Enable username case-sensitive.
disable	Disable username case-sensitive.

group-override-attr-type

RADIUS attribute type to override user group information.

option

Option	Description
filter-Id	Filter-Id
class	Class

class <name>

Class attribute name(s).

Class name.

string

Maximum length: 79

password-renewal

Enable/disable password renewal.

option

enable

Option	Description
enable	Enable password renewal.
disable	Disable password renewal.

password-encoding

Password encoding.

option

auto

Option	Description
auto	Use original password encoding.
ISO-8859-1	Use ISO-8859-1 password encoding.

mac-username-delimiter

MAC authentication username delimiter.

option

hyphen

Option	Description
hyphen	Use hyphen as delimiter for MAC authentication username.
single-hyphen	Use single hyphen as delimiter for MAC authentication username.
colon	Use colon as delimiter for MAC authentication username.
none	No delimiter for MAC authentication username.

mac-password-delimiter

MAC authentication password delimiter.

option

hyphen

Option	Description
hyphen	Use hyphen as delimiter for MAC authentication password.
single-hyphen	Use single hyphen as delimiter for MAC authentication password.
colon	Use colon as delimiter for MAC authentication password.
none	No delimiter for MAC authentication password.

mac-case

MAC authentication case.

option

lowercase

Option	Description
uppercase	Use uppercase MAC.
lowercase	Use lowercase MAC.

acct-all-servers

Enable/disable sending of accounting messages to all configured servers.

option

disable

Option	Description
enable	Send accounting messages to all configured servers.
disable	Send accounting message only to servers that are confirmed to be reachable.

switch-controller-acct-fast-framedip-detect

Switch controller accounting message Framed-IP detection from DHCP snooping.

integer

Minimum value: 2 Maximum value: 600

interface-select-method

Specify how to select outgoing interface to reach server.

option

auto

Option	Description
auto	Set outgoing interface automatically.
sdwan	Set outgoing interface by SD-WAN or policy routing rules.
specify	Set outgoing interface manually.

interface

Specify outgoing interface to reach server.

string

Maximum length: 15

switch-controller-service-type

RADIUS service type.

option

Option	Description
login	User should be connected to a host.
framed	User use Framed Protocol.
callback-login	User disconnected and called back.
callback-framed	User disconnected and called back, then a Framed Protocol.
outbound	User granted access to outgoing devices.
administrative	User granted access to the administrative unsigned interface.
nas-prompt	User provided a command prompt on the NAS.
authenticate-only	Authentication requested, and no auth info needs to be returned.
callback-nas-prompt	User disconnected and called back, then provided a command prompt.
call-check	Used by the NAS in an Access-Request packet, Access-Accept to answer the call.
callback-administrative	User disconnected and called back, granted access to the admin unsigned interface.

rsso

Enable/disable RADIUS based single sign on feature.

option

disable

Option	Description
enable	Enable RADIUS based single sign on feature.
disable	Disable RADIUS based single sign on feature.

rsso-radius-server-port

UDP port to listen on for RADIUS Start and Stop records.

integer

Minimum value: 0 Maximum value: 65535

1813

rsso-radius-response

Enable/disable sending RADIUS response packets after receiving Start and Stop records.

option

disable

Option	Description
enable	Enable sending RADIUS response packets.
disable	Disable sending RADIUS response packets.

rsso-validate-request-secret

Enable/disable validating the RADIUS request shared secret in the Start or End record.

option

disable

Option	Description
enable	Enable validating RADIUS request shared secret.
disable	Disable validating RADIUS request shared secret.

rsso-secret

RADIUS secret used by the RADIUS accounting server.

password

Not Specified

rsso-endpoint-attribute

RADIUS attributes used to extract the user end point identifier from the RADIUS Start record.

option

Calling-Station-Id

Option	Description
User-Name	Use this attribute.
NAS-IP-Address	Use this attribute.
Framed-IP-Address	Use this attribute.
Framed-IP-Netmask	Use this attribute.
Filter-Id	Use this attribute.
Login-IP-Host	Use this attribute.
Reply-Message	Use this attribute.
Callback-Number	Use this attribute.
Callback-Id	Use this attribute.
Framed-Route	Use this attribute.
Framed-IPX-Network	Use this attribute.
Class	Use this attribute.
Called-Station-Id	Use this attribute.
Calling-Station-Id	Use this attribute.
NAS-Identifier	Use this attribute.
Proxy-State	Use this attribute.
Login-LAT-Service	Use this attribute.
Login-LAT-Node	Use this attribute.
Login-LAT-Group	Use this attribute.
Framed-AppleTalk-Zone	Use this attribute.
Acct-Session-Id	Use this attribute.
Acct-Multi-Session-Id	Use this attribute.

rsso-endpoint-block-attribute

RADIUS attributes used to block a user.

option

Option	Description
User-Name	Use this attribute.
NAS-IP-Address	Use this attribute.
Framed-IP-Address	Use this attribute.
Framed-IP-Netmask	Use this attribute.
Filter-Id	Use this attribute.
Login-IP-Host	Use this attribute.
Reply-Message	Use this attribute.
Callback-Number	Use this attribute.
Callback-Id	Use this attribute.
Framed-Route	Use this attribute.
Framed-IPX-Network	Use this attribute.
Class	Use this attribute.
Called-Station-Id	Use this attribute.
Calling-Station-Id	Use this attribute.
NAS-Identifier	Use this attribute.
Proxy-State	Use this attribute.
Login-LAT-Service	Use this attribute.
Login-LAT-Node	Use this attribute.
Login-LAT-Group	Use this attribute.
Framed-AppleTalk-Zone	Use this attribute.
Acct-Session-Id	Use this attribute.
Acct-Multi-Session-Id	Use this attribute.

sso-attribute

RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record.

option

Class

Option	Description
User-Name	Use this attribute.
NAS-IP-Address	Use this attribute.
Framed-IP-Address	Use this attribute.
Framed-IP-Netmask	Use this attribute.
Filter-Id	Use this attribute.
Login-IP-Host	Use this attribute.
Reply-Message	Use this attribute.
Callback-Number	Use this attribute.
Callback-Id	Use this attribute.
Framed-Route	Use this attribute.
Framed-IPX-Network	Use this attribute.
Class	Use this attribute.
Called-Station-Id	Use this attribute.
Calling-Station-Id	Use this attribute.
NAS-Identifier	Use this attribute.
Proxy-State	Use this attribute.
Login-LAT-Service	Use this attribute.
Login-LAT-Node	Use this attribute.
Login-LAT-Group	Use this attribute.
Framed-AppleTalk-Zone	Use this attribute.
Acct-Session-Id	Use this attribute.
Acct-Multi-Session-Id	Use this attribute.

sso-attribute-key

Key prefix for SSO group value in the SSO attribute.

string

Maximum length: 35

sso-attribute-value-override

Enable/disable override old attribute value with new value for the same endpoint.

option

enable

Option	Description
enable	Enable override old attribute value with new value for the same endpoint.
disable	Disable override old attribute value with new value for the same endpoint.

rsso-context-timeout

Time in seconds before the logged out user is removed from the "user context list" of logged on users.

integer

Minimum value: 0 Maximum value: 4294967295

28800

rsso-log-period

Time interval in seconds that group event log messages will be generated for dynamic profile events.

integer

Minimum value: 0 Maximum value: 4294967295

rsso-log-flags

Events to log.

option

protocol-error profile-missing accounting-stop-missed accounting-event endpoint-block radiusd-other

Option	Description
protocol-error	Enable this log type.
profile-missing	Enable this log type.
accounting-stop-missed	Enable this log type.
accounting-event	Enable this log type.
endpoint-block	Enable this log type.
radiusd-other	Enable this log type.
none	Disable all logging.

rsso-flush-ip-session

Enable/disable flushing user IP sessions on RADIUS accounting Stop messages.

option

disable

Option	Description
enable	Enable flush user IP sessions on RADIUS accounting stop.
disable	Disable flush user IP sessions on RADIUS accounting stop.

rsso-ep-one-ip-only

Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages.

option

disable

Option	Description
enable	Enable replacement of old IP address with new IP address for the same endpoint on RADIUS accounting start.
disable	Disable replacement of old IP address with new IP address for the same endpoint on RADIUS accounting start.

delimiter

Configure delimiter to be used for separating profile group names in the SSO attribute.

option

plus

Option	Description
plus	Plus character "+".
comma	Comma character ",".

config accounting-server

Parameter

Description

Type

Size

Default

ID.

integer

Minimum value: 0 Maximum value: 4294967295

status

Status.

option

disable

Option	Description
enable	Log to remote syslog server.
disable	Do not log to remote syslog server.

server

Server CN domain name or IP address.

string

Maximum length: 63

secret

Secret key.

password

Not Specified

port

RADIUS accounting port number.

integer

Minimum value: 0 Maximum value: 65535

source-ip

Source IP address for communications to the RADIUS server.

string

Maximum length: 63

interface-select-method

Specify how to select outgoing interface to reach server.

option

auto

Option	Description
auto	Set outgoing interface automatically.
sdwan	Set outgoing interface by SD-WAN or policy routing rules.
specify	Set outgoing interface manually.

interface

Specify outgoing interface to reach server.

string

Maximum length: 15

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config user radius

config user radius

config user radius

config accounting-server

config user radius

config user radius

config user radius

config accounting-server