Create or edit an SSL-VPN portal
Select Create New to open the New SSL-VPN Portal page.
Select an SSL-VPN portal from the list and then click Edit to open the Edit SSL-VPN Portal page.
Configure the following settings in the New SSL-VPN Portal page or Edit SSL-VPN Portal page and then click OK:
|
Name |
The name for the portal. After you create the SSL-VPN portal, the name cannot be changed. |
|
Limit Users to One SSL-VPN Connection at a Time |
You can set the SSL VPN tunnel such that each user can only log into the tunnel one time concurrently per user per login. That is, after logging into the portal, they cannot go to another system and log in with the same credentials again. This option is disabled by default. |
|
Tunnel Mode |
Enable to determine how tunnel-mode clients are assigned IPv4 addresses. |
|
Enable Split Tunneling |
If you want to use split tunneling, select Enabled Based on Policy Destination or Enabled for Trusted Destinations. |
|
Routing Address Override |
If you enable split tunneling, you are required to set the routing address, which is the address that your corporate network is using. Traffic intended for the routing address is not split from the tunnel. |
|
Source IP Pools |
Select an IP pool for users to acquire an IP address when connecting to the portal. There is always a default pool available if you do not create your own. |
|
IPv6 Tunnel Mode |
Move the slider to determine how tunnel-mode clients are assigned IPv6 addresses. |
|
Enable IPv6 Split Tunneling |
Select Disabled, Enabled Based on Policy Destination, or Enabled for Trusted Destinations. |
|
IPv6 Routing Address Override |
If you enable split tunneling, you are required to set the IPv6 routing address, which is the address that your corporate network is using. Traffic intended for the routing address is not split from the tunnel. |
|
Source IPv6 Pools |
Select an IPv6 pool for users to acquire an IP address when connecting to the portal. There is always a default pool available if you do not create your own. |
|
Allow client to save password |
When enabled, if the user selects this option, their password is stored on the user’s computer and will automatically populate each time they connect to the VPN. |
|
Allow client to connect automatically |
When enabled, if the user selects this option, when the FortiClient application is launched, for example after a reboot or system startup, FortiClient will automatically attempt to connect to the VPN tunnel. |
|
Allow client to keep connections alive |
When enabled, if the user selects this option, the FortiClient should try to reconnect once it detects the VPN connection is down unexpectedly (not manually disconnected by user). |
|
DNS Split Tunneling |
Enable and then create or edit the DNS entry. See Create or edit a DNS entry. |
|
Host Check |
Enable and then select Realtime AntiVirus, Firewall, or Enable both. |
|
Restrict to Specific OS Versions |
Enable or disable. |
|
Enable Web Mode |
Enable for web-mode access. |
|
Portal Message |
This is a text header that appears on the top of the web portal. |
|
Theme |
Select a color styling specifically for the web portal. |
|
Show Session Information |
The Show Session Information widget displays the login name of the user, the amount of time the user has been logged in and the inbound and outbound traffic statistics. |
|
Show Connection Launcher |
Displays the Connection Launcher widget in the web portal. |
|
Show Login History |
Select to include user login history on the web portal. |
|
User Bookmarks |
Enable to allow users to add their own bookmarks in the web portal. |
|
Rewrite Content IP/UI/ |
Enable or disable whether the content can be rewritten. |
|
FDP/VNC clipboard |
Enable or disable the FDP/VNC clipboard. |
|
Create New |
Create a bookmark. See Create or edit a bookmark. |
|
Edit |
Edit a selected bookmark. See Create or edit a bookmark. |
|
Delete |
Delete a selected bookmark. |
|
Search |
Enter a search term to find in the list. |
|
Enable FortiClient Download |
Enable to allow users to customize the download URL for FortiClient. |
|
Download Method |
If you enable FortiClient download, select whether FortiClient will directly download or use SSL-VPN proxy. |
|
Customize Download Location |
Enable to change the download location. |
|
Windows |
Enable to specify the Windows download location. |
|
Mac |
Enable to specify the Mac download location. |
Disable the clipboard in SSL-VPN web-mode RDP connections
In web portal profiles, the clipboard can be disabled for SSL VPN web-mode RDP/VNC connections. Users will not be able to copy and paste content to or from the internal server.
To disable the RDP/VNC clipboard in the GUI:
-
Go to VPN > SSL-VPN Portals.
-
Select a portal and click Edit.
-
Disable RDP/VNC clipboard.
-
Click OK.
To disable the RDP/VNC clipboard in the CLI:
config vpn ssl web portal
edit <portal_name>
set clipboard disable
next
end