config system gre-tunnel
Configure GRE tunnel.
config system gre-tunnel
Description: Configure GRE tunnel.
edit <name>
set interface {string}
set remote-gw {ipv4-address}
set local-gw {ipv4-address-any}
set sequence-number-transmission [disable|enable]
set sequence-number-reception [disable|enable]
set checksum-transmission [disable|enable]
set checksum-reception [disable|enable]
set key-outbound {integer}
set key-inbound {integer}
set keepalive-interval {integer}
set keepalive-failtimes {integer}
next
end
config system gre-tunnel
|
Parameter |
Description |
Type |
Size |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
interface |
Interface name. |
string |
Maximum length: 15 |
|||||||
|
remote-gw |
IP address of the remote gateway. |
ipv4-address |
Not Specified |
|||||||
|
local-gw |
IP address of the local gateway. |
ipv4-address-any |
Not Specified |
|||||||
|
sequence-number-transmission |
Enable/disable including of sequence numbers in transmitted GRE packets. |
option |
- |
|||||||
|
|
|
|||||||||
|
sequence-number-reception |
Enable/disable validating sequence numbers in received GRE packets. |
option |
- |
|||||||
|
|
|
|||||||||
|
checksum-transmission |
Enable/disable including checksums in transmitted GRE packets. |
option |
- |
|||||||
|
|
|
|||||||||
|
checksum-reception |
Enable/disable validating checksums in received GRE packets. |
option |
- |
|||||||
|
|
|
|||||||||
|
key-outbound |
Include this key in transmitted GRE packets . |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||
|
key-inbound |
Require received GRE packets contain this key . |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||
|
keepalive-interval |
Keepalive message interval . |
integer |
Minimum value: 0 Maximum value: 32767 |
|||||||
|
keepalive-failtimes |
Number of consecutive unreturned keepalive messages before a GRE connection is considered down . |
integer |
Minimum value: 1 Maximum value: 255 |
|||||||