Add or edit a trunk
A trunk can be created on a switch with multiple ports.
To add or edit a trunk:
-
In Switch > Configuration > Port Configuration, select the appropriate site and switch.
-
Select Trunk.
-
Either:
-
Click Create New to add a new trunk.
-
Select a trunk and click Edit to edit an existing trunk.
-
-
In the form, enter or update the following information:
Field
Required
Description
Name
Y
Enter a name for this trunk.
MC-LAG
Y
Enable or disable multichassis link aggregation (MCLAG) on this trunk.
Mode
Y
Select the mode: Static (LACP DIsabled), LACP Passive, or LACP Active.
Members
Y
Select the ports to add to this trunk.
Native VLAN
Y
Select the native VLAN to use for this trunk.
Allowed VLANs
N
Select the VLANs for which the port can transmit or receive frames.
Edge Port
Y
Enable or disable this trunk as an edge port.
STP Status
Y
Enable or disable spanning tree protocol (STP) on this trunk.
DHCP Snooping
Y
Set this trunk as Trusted or Untrusted for DHCP.
-
Click OK.