Add or edit a trunk

A trunk can be created on a switch with multiple ports.

To add or edit a trunk:

1. In Switch > Configuration > Port Configuration, select the appropriate site and switch.

2. Select Trunk.

3. Either:

   1. Click Create New to add a new trunk.

   2. Select a trunk and click Edit to edit an existing trunk.

4. In the form, enter or update the following information:

   Field	Required	Description
   Name	Y	Enter a name for this trunk.
   MC-LAG	Y	Enable or disable MCLAG on this trunk.
   Mode	Y	Select the mode: Static, Passive LACP, or Active LACP.
   Members	Y	Select the ports to add to this trunk.
   Native VLAN	Y	Select the native VLAN.
   Allowed VLANs	N	Select allowed VLANs.
   Edge Port	N	Enable or disable this interface as an edge port.
   STP Status	N	Enable or disable spanning-tree protocol (STP).
   DHCP Snooping	N	Select Trusted or Untrusted.

5. Click OK.