Network
Use the Network options to configure system settings such as configuring interfaces, DNS, and static routes.
Interface
FortiNDR has the following preset ports which cannot be changed. For more information about port configuration, see Initial setup > Ports.
Port (interface) | Type | Default open ports |
---|---|---|
Port1 |
10GE copper 10G |
Management port. TCP 443 (HTTPS and GUI), TCP 22 SSH (CLI). |
Port2 |
10GE copper 10G |
Sniffer port (default). |
Serial / Com1 |
Serial port |
9600 baud, 8 data bits, 1 stop bit, no parity, XON/XOFF. |
Port3 and Port4 |
1GE IPMI (Intelligent Platform Management Interface) |
Disabled (default). |
Port 5-8 (FortiNDR-3500F gen3) |
Fiber 10G SFP+ |
Sniffer port (default) |
Only Super Admin users can access the CLI using SSH. For more information, seeAdmin Profiles |
DNS and Static Routes
Use the DNS and Static Routes pages to configure DNS and routing entries.