Network
Use the Network options to configure system settings such as configuring interfaces, DNS, and static routes.
Interface
FortiNDR has the following preset ports which cannot be changed.
Port (interface) | Type | Default open ports |
---|---|---|
Port1 |
10GE copper 10G |
Management port. TCP 443 (HTTPS and GUI), TCP 22 SSH (CLI). |
Port2 |
10GE copper 10G |
Sniffer port (default). |
Serial / Com1 |
Serial port |
9600 baud, 8 data bits, 1 stop bit, no parity, XON/XOFF. |
Port3 and Port4 |
1GE IPMI (Intelligent Platform Management Interface) |
Disabled (default). |
Port 5-8 (FortiNDR-3500F gen3) |
Fiber 10G SFP+ |
Sniffer port (default) |
DNS and Static Routes
Use the DNS and Static Routes pages to configure DNS and routing entries.