SNMP (System Level)
Requirements:
-
SNMP Agent enabled
-
SNMP v1/v2c community or v3 account
FortiGates in High Availability mode using the dedicated Management port (mgmt1): Allow SNMP polling through the dedicated management port. For instructions, see KB article https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-SNMP-Community-over-Cluster/ta-p/192507.
For additional details on each view, refer to the Administration guide link in each section.
SNMP Agent |
|
FortiGate Administration Guide |
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/899762/snmp-agent |
UI Navigation |
System > SNMP |
SNMP agent |
Enable |
SNMP v1/v2c communities |
|
FortiGate Administration Guide |
|
GUI Navigation |
System > SNMP |
Community Name |
Community Name |
Enabled |
Selected |
Hosts |
IP Address: <eth0 IP address of FortiNAC Control Server> Host Type: Accept Queries Only |
Queries |
V1 or v2 enabled Port: 161 |
Traps |
V1 or v2 enabled Port: 162 |
SNMP Events |
<all disabled> |
SNMP v3 users |
|
FortiGate Administration Guide |
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/457149/snmp-v3-users |
GUI Navigation |
System > SNMP |
User Name |
User Name |
Enabled |
Selected |
Security Level |
Authentication (No Private)
Authentication (Private)
|
Hosts |
IP Address: <eth0 IP address of FortiNAC Control Server> Host Type: Accept Queries Only |
Queries |
Enabled Port: 161 |
Traps |
Enabled Port: 162 |
SNMP Events |
<all disabled> |