Resolved issues
The following issues have been fixed in 7.6.4. To inquire about a particular bug, please contact Customer Service & Support.
AP Manager
|
Bug ID |
Description |
|---|---|
| 1131117 | Not able to activate Factory Default profiles; GUI returns error, "The selected platform is no longer supported." |
| 1150508 |
Unable to set the Override Radio feature for managed APs under the AP Manager. |
|
1148572 |
SSID per-device-mapping cannot save the DHCP server settings. |
Device Manager
|
Bug ID |
Description |
|---|---|
| 1094451 | If the Timezone field in the System Template is left blank, FortiManager Cloud may apply its default timezone and overwrite the existing timezone on the FortiGates. |
|
1119223 |
FortiManager erroneously tries to "unset annex" on DSL interface on the FortiGate "FGT-50G-DLS". |
| 1129574 | Unable to restrict Firmware upgrade via Admin Profile. |
| 1148864 |
During provisioning, if multiple scripts attempt to modify the aggregate interface, the database installation fails with the following error: [attribute "vdom" check error - runtime error -2: Virtual domain must be same as virtual domain () for all aggregate/redundant interfaces] This issue occurs only with aggregate interfaces. |
|
1149973 |
In the HA Status section of the managed FortiGate, the Uptime and State Changed fields are not populated. |
| 1152564 | Unable to edit route-map due to the following error "rule/2/set-priority is out of range (property: set-priority)" |
| 1153376 |
If devices are added to FortiManager Cloud after SD-WAN is enabled, then Traffic Shaping/SD-WAN may display No Data or No Records Found. If the user enables SD-WAN after the device is already managed by FortiManager Cloud, there should be no issue. |
| 1166830 |
FortiGates may be unexpectedly renamed during policy package installation when deploying to multiple devices (more than 5). |
| 1167436 |
FortiManager Cloud displays "retrievehaconffail" error when performing retrieve config for FortiGate's HA cluster. |
FortiSwitch Manager
|
Bug ID |
Description |
|---|---|
| 1097467 |
There is a mismatch in the per-VDOM limit between the Managed FortiSwitch on the FortiManager and the actual FortiGate, causing a copy failure error when installing the configuration. So far, this issue has been observed on the FGT-90G. |
|
1153287 |
The maximum number of managed FortiSwitches on FortiManager does not match with the maximum number of managed FortiSwitches by FortiGate, resulting in a copy failure error during installation to FortiGates. |
|
1161320 |
FortiManager Cloud shows an incomplete FortiSwitch topology compared with FortiGate. |
Others
|
Bug ID |
Description |
|---|---|
| 1065593 | Not able to upgrade ADOM. |
| 1071646 | Formatted Event logs do not display the correct timestamp. |
| 1113799 | Unable to upgarde the FortiAP or FortiSwitch form FortiManager Cloud. |
| 1125382 | When EMS is added as a Fabric Connector to these FortiGates from FortiManager, all devices appear under FortiManager-managed devices, but only the primary FortiGates serial number is displayed. |
| 1142559 | When attempting to upload the firmware image from FortiGuard, FortiManager returns the following error "Code: -1, Invalid image". This issue has primarily been observed on FortiGate hardware platforms running special build firmware versions, where the image contains an encrypted MBR such as on the FortiGateRugged-70G-5G-Dual, FortiGateRugged-70G, FortiGateRugged-50G-5G, FortiWiFi-70G models. |
|
1145473 |
Upgrading ADOM fails with fortiextender object errors "Fail (errno=0):invalid value" and "fail: err=-999,The string contains XSS vulnerability characters" |
| 1147636 | Universal connector card on Fabric View page is missing under Fabric View > Endpoint/Identity connectors. |
| 1160086 | Unable to upgrade ADOM from v7.2 to v7.4 due to HTTP3(QUIC) error in deep-inspection profile. |
| 1168422 | FortiManager Cloud does not properly support the "FortiGate-50G-SFP-POE" platform. |
| 1169450 | When Backup ADOM is enabled and auto-sync is configured, FortiManager Cloud is not able to automatically retrieve the changes from FortiGate devices. Devices should remain in sync without the need for manual retrieval. |
| 1170281 |
Not able to create a new VDOM or remove any interfaces from VDOMs when Workspace mode is enabled. |
|
1177051 |
"retrievehaconffail" error has been observed when performing retrieve config on the FortiManager Cloud GUI. |
Policy and Objects
|
Bug ID |
Description |
|---|---|
| 1179704 |
FortiManager Cloud attempted to remove internet-service-custom objects from the FortiGates; however, the installation failed due to syntax incompatibility caused by static entries that cannot be deleted. |
| 1092581 | FortiManager Cloud cannot modify rat-timeout-profile in Policy Packages. |
| 1011220 | FortiManager Cloud constantly changes the UUID of some objects. |
| 1180805 | FortiManager Cloud is attempting to purge the "webfilter ftgd-risk-level"
entries; however, because these are static, default built-in entries on the
FortiGates, the installation fails. |
| 1054707 | FortiManager Cloud try to install "unset qos-policy" and installation fails. |
|
1087777 |
During policy installation, FortiManager Cloud tries to delete firewall address object for the SSID interface UUID causing PP Modifying |
| 1142983 | In FortiManager, creating a threat feed connector and applying it to multiple VDOMs results in the same UUID being assigned across all instances. This behavior may lead to duplicate UUID issues. |
|
1171386 |
Install failure might be observed when pushing proxy-based antivirus profile to FortiGate models FGT-40F and FGT-60F. |
|
1162327 |
Install preview may get stuck if another user is simultaneously pushing an install on a different FortiGate within FortiManager Cloud. |
|
1169058 |
Installation might fail to these devices "FGT/FWF-30G/31G" due to some unsupported syntax. |
| 1134276 | Installation of "config system ddns" configuration fails. |
|
1167035 |
Installation to FortiGates with multiple VDOMs might fail with the following error message: "max entry. object: firewall internet-service-custom. detail: global limit. solution: limit is 512" |
|
1131041 |
Not able to create a ZTNA server due to the certificate error. |
|
1186242 |
Policy package installation with VIP type "server-load-balance" fails when VDOM exception "firewall.vip" is enabled |
| 1089894 | The Policy Package import may hang indefinitely on a specific FortiGate VDOM due to recursive object references. |
| 1078598 | Unable to import policy due to issues related to the protocol-options feature. |
| 1154383 |
Unable to move policy packages & move/delete folders. Error "cannot get pkg path" is displayed. |
| 1096879 | When checking the policy package diff, FortiManager Cloud shows that the "system
replacemsg spam" entry will be deleted; however, this change is not
reflected in the install log. |
| 1157272 | When creating a new entry under the Logical Relationship for a DLP dictionary, the Pattern field must be completed only for the applicable entry types; it should remain blank for those that do not require it. |
| 1152640 |
When no port setting (empty value) has been set for HTTPS on SSL/SSH Inspection Profile, the installation preview shows error "https ... Must set at least one port (default port:443) or enable ssl inspect-all". |
| 971065 | When the number of Custom Internet Services exceeds 256, installation fails due to this limitation. |
| 1173197 | Where Used feature is not working for objects that contain a forward slash (/). |
System Settings
|
Bug ID |
Description |
|---|---|
| 1169081 |
When clicking on the Approve this request link in the Workflow mode, the following error message can be observed. "Unable to complete action, failed to 'approve'. " Workaround:Log in to FortiManager Cloud to approve the task. |
VPN Manager
|
Bug ID |
Description |
|---|---|
| 1166323 |
The VPN Manager > IPsec VPN Communities page no longer displays correctly the page loads but shows only a blank (white) screen. |